Miele KM 421 Installation manual
Miele KM 421 Manual
 |
View all Miele KM 421 manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele KM 421 manual content summary:
- Miele KM 421 | Installation manual - Page 1
Installation Instructions Ceramic Cooktops KM 421 KM 424 KM 427 To prevent accidents and machine damage, read these instructions before installation or use. en - US, CA M.-Nr. 05 647 580 - Miele KM 421 | Installation manual - Page 2
Contents IMPORTANT SAFETY INSTRUCTIONS Installation 3 Safety distances above the appliance 4 Appliance and cut-out dimensions KM 421 5 KM 424 6 KM 427 7 Installation Installing the spring clips 8 Granite countertops 8 Installing the cooktop 9 Electrical connection 2 - Miele KM 421 | Installation manual - Page 3
the consumer. Installation The minimum distances given in these instructions must be observed to ensure safe operation and to reduce the risk of fire. To prevent damage, install cabinetry and the venting hood before installing the cooktop. ~ The countertop must be bonded with heat resistant (212 - Miele KM 421 | Installation manual - Page 4
in these applications. Please contact the nearest Miele Dealer or the Miele Technical Service Department with specific requirements. ~ Because of cooktop could damage these appliances. ~ Make sure that the power cord to the cooktop does not come in contact with any mechanical parts once the cooktop - Miele KM 421 | Installation manual - Page 5
KM 421 Appliance and cut-out dimensions (835m3 8"m) (8m5 1m6") (835m3 8m" ) (2503125 1m6" m) ( between the rear wall and a right or left hand side wall. See also "Important safety instructions". ^ Seal the cut surfaces with a suitable heat resistant sealant to avoid swelling caused by moisture - Miele KM 421 | Installation manual - Page 6
Appliance and cut-out dimensions KM 424 (835m3 8"m) (835m3 8m("8)mm5)16" " 20 15 16 (532mm) 30 1 "16 (763mm) b * the rear wall and a right or left hand side wall. See also "Important safety instructions". ^ Seal the cut surfaces with a suitable heat resistant sealant to avoid swelling caused by - Miele KM 421 | Installation manual - Page 7
KM 427 Appliance and cut-out dimensions (835m3 8"m) (835m3 8(m"8m)5 1m6") " 20 15 16 (532mm) mm) between the rear wall and a right or left hand side wall. See also "Important safety instructions". ^ Seal the cut surfaces with a suitable heat resistant sealant to avoid swelling caused by moisture. - Miele KM 421 | Installation manual - Page 8
Installation Installing the spring clips (75mm) 3 " Granite countertops b ^ Fix the supplied spring clips, a, at the marked positions as shown above, by laying them on the upper edge of the cut-out and then securing them with the 3.5 x 25 mm screws supplied. For granite countertops, the spring - Miele KM 421 | Installation manual - Page 9
permanently sealed into the countertop when installed. The sealing strip under the edge of the cooktop provides a sufficient seal for the countertop. If the cooktop is sealed into position, the countertop or appliance could be damaged if the cooktop needs to be removed for maintenance or service. 9 - Miele KM 421 | Installation manual - Page 10
the fuse to the unit before installation or service. ^ Note to the installer: Please leave these instructions with the consumer. Power supply: Please check the data plate. KM 421: - 240 VAC, 60 Hz, 30 A fuse rating - 208 VAC, 60 Hz, 30 A fuse rating KM 424: - 240 VAC, 60 Hz, 40 A fuse rating - 208 - Miele KM 421 | Installation manual - Page 11
11 - Miele KM 421 | Installation manual - Page 12
Alterations rights reserved / 4810 For the most updated manual see the Miele website. M.-Nr. 05 647 580 / 03
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Installation Instructions
Ceramic Cooktops
KM 421
KM 424
KM 427
To prevent accidents and
machine damage,
read these instructions
before
installation or use.
M.-Nr. 05 647 580
en - US, CA