Miele KM 421 Installation manual - Page 7
KM 427 7, If, during installation, the seal
![]() |
View all Miele KM 421 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
KM 427 Appliance and cut-out dimensions (835m3 8"m) (835m3 8(m"8m)5 1m6") " 20 15 16 (532mm) * max.R3/16 " max.R4mm (752m15m16") b (83859"mm) a Spring clips (752m15m16") 35 9 (903m16m" ) 2(0513 88"mm) (m2 i"n.50) b ^ Make the countertop cut-out following the dimensions given in the illustration. ^ Remember to maintain a minimum distance of 2" (50 mm) between the rear wall and a right or left hand side wall. See also "Important safety instructions". ^ Seal the cut surfaces with a suitable heat resistant sealant to avoid swelling caused by moisture. If, during installation, the seal around the frame does not sit flush with the countertop or the corners, the corner radius max. R4 (3/8") can be carefully filed down to fit. *Use max. 3/8" drill bit. 7
![](/manual_guide/products/miele-km-427-installation-manual-d0a4d22/7.png)