Miele KM 421 Installation manual - Page 9
Installing the cooktop 9, permanently sealed into
![]() |
View all Miele KM 421 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installing the cooktop Installation ^ Feed the power cord down through the cut-out and connect the appliance to the power supply. ^ Position the cooktop on the spring clips, a. ^ Then with a hand on each side of the cooktop press down on the edges evenly until it clicks into position. When doing so make sure that the cooktop seal sits tightly on the countertop to ensure a correct seal is provided. The cooktop can now only be removed with a special tool. The cooktop must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the cooktop provides a sufficient seal for the countertop. If the cooktop is sealed into position, the countertop or appliance could be damaged if the cooktop needs to be removed for maintenance or service. 9
![](/manual_guide/products/miele-km-427-installation-manual-d0a4d22/9.png)