Miele KM 5860 Operating and Installation manual - Page 48

Installation 48, get on the top surface of

Get Miele KM 5860 PDF manuals and user guides View all Miele KM 5860 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Installation The exact positions of the spring clamps and the support bars (for beveled cooktops only) are shown in the "Installation dimensions" of each unit. Facet cooktops: A special sealing strip ensures the slip-proof seating of the cooktop in the cutout. The gap between the frame and the countertop will narrow after a little time has passed. ^ Create the countertop cutout as shown in the "Installation dimensions". Observe the safety distances (see "Installation Safety Instructions"). Wood or solid surface countertop ^ Seal the cut surfaces with a suitable sealant to avoid swelling caused by moisture. The materials used must be heat resistant. Ensure that these materials do not get on the top surface of the countertop panels. ^ Position the spring clips and the securing strips (supplied with the appliance; only for facet cooktops) on the top edge of the cut-out ^ Attach the spring clips a and the securing strips b with the 3.5 x 25 mm wood screws (supplied). 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
The exact positions of the spring
clamps and the support bars (for
beveled cooktops only) are shown in
the "Installation dimensions" of each
unit.
Facet cooktops:
A special sealing strip ensures the
slip-proof seating of the cooktop in
the cutout. The gap between the
frame and the countertop will narrow
after a little time has passed.
^
Create the countertop cutout as
shown in the "Installation
dimensions". Observe the safety
distances (see "Installation Safety
Instructions").
Wood or solid surface countertop
^
Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be heat
resistant.
Ensure that these materials do not
get on the top surface of the
countertop panels.
^
Position the spring clips and the
securing strips (supplied with the
appliance; only for facet cooktops)
on the top edge of the cut-out
^
Attach the spring clips
a
and the
securing strips
b
with the
3.5 x 25 mm wood screws (supplied).
Installation
48