Miele KS 7793 D Operating instructions/Installation instructions - Page 19
Lower ventilation slit, Cabinet door, – Weight of the door panel, mm / 3/4 19 mm thick.
View all Miele KS 7793 D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
*INSTALLATION* Installation passage volume of at least 31"² (200 cm2) to allow the warm air to dissipate unimpeded. - If you wish to fit a grille in the ventilation openings, the ventilation openings must be larger than 31"² (200 cm2). The passage volume of 31"² (200 cm2) is the total area of the opening slits in the grille. - Important! The larger the ventilation slits, the more economically the appliance will work. Lower ventilation slit The appliance can be ventilated via the cabinet plinth with the ventilation grille supplied or with a minimum ventilation opening of 31 in2 cross-section area. When using the grille supplied, please proceed as follows: Cabinet door An cabinet door is required. The cabinet door must be at least 5/8" (16 mm) / 3/4" (19 mm) thick. - Weight of the door panel If the door panel is too heavy damage can occur. Installing a door panel which is heavier than the maximum permitted weight could damage the hinges. This can cause subsequent functional problems. Before installing the door panel, ensure that the weight of the door panel does not exceed the maximum permitted weight. The maximum permissible weight of the door panel is: Refrigeration appliance KS 7793 D lb (kg) 57 (26) Cut an opening in plinth as shown in the diagram. Place ventilation grille in the opening. Push snap fasteners into the ventilation grille from behind until the hooks touch the plinth. Reinstall the plinth with the ventilation grille. 19