Miele KWT 6832 SGS Operating instructions/Installation instructions - Page 14

Turning the appliance on and off Before first use Protective film Stainless steel surfaces have a layer of protective foil to prevent scratching during transportation. ^ Do not remove the foil until the appliance has been positioned in its final location. Start at one of the top corners. Turning the appliance on The electrical supply symbol t will appear in the display as soon as the appliance has been turned on at the main power supply. ^ Touch the On/Off button. Cleaning and Care ^ Immediately after removing the protective foil, treat stainless steel surfaces with the Miele stainless steel conditioning agent supplied with the appliance. Important! Each application of the Miele stainless steel conditioner forms a durable protective film that is stain and water resistant! ^ Clean the inside of the appliance and the accessories with lukewarm water and liquid dish soap and then dry with a soft cloth. Operating the appliance The appliance is operated with the use of touch keys activated by a finger. A tone will sound each time a button is touched. You can deactivate this, if you wish (see "Selecting additional settings - Acoustic signals"). The electrical supply symbol t will then go out and the appliance will start to cool. The sensors for the upper, middle, and lower wine storage zones will then appear in the control panel. The selected zone will be highlighted yellow and the temperature of the selected zone will show in the display. The first time the appliance is turned on the sensors for the wine storage zones and the alarm symbol ; will flash until the selected temperature has been reached in the zones. As soon as the set temperature has been reached, the sensor for the respective wine storage zone will light up constantly. the alarm symbol ; will go out as soon as the set temperatures have been reached in each zone. The interior lighting will come on when the door is opened. 14