Miele KWT 6832 SGS Operating instructions/Installation instructions - Page 48
and an audible, alarm also sounds.
View all Miele KWT 6832 SGS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Frequently asked questions Indicators in the display Problem Possible cause Solution The alarm symbol The door alarm has been ; is lit up and the triggered. three sensor buttons of the wine storage zones are flashing in the control panel. An audible alarm is also sounding. ^ Close the door. The sensors and the alarm symbol ; will go out and the audible alarm stops. The alarm symbol The temperature in the ; and the sensor respective wine storage button for one of zone has risen higher or the wine storage fallen lower than the zones is flashing temperature set. This could and an audible be due to: alarm also sounds. - the door being opened too frequently ^ Rectify the cause of the alarm. The alarm symbol ; goes out and the sensor for the zone concerned lights up constantly. The audible alarm stops. - a blocked ventilation gap - there has been a lengthy interruption of the power supply. The active charcoal This is the reminder to filter change change the active charcoal indicator light filter. lights up. ^ Replace the active charcoal filter and then confirm the filter change in settings mode (see "Active charcoal filter"). A dash is lit up up/flashing in the display. "F1" to "F3" or "S1" to "S9" appear. Only temperatures within the range of the appliance temperature will be displayed. There is a fault. ^ Contact Miele Service. 48