Miele S7280 FreshAir Product Manual - Page 9
Before the first use 9, Included accessories 9, en
View all Miele S7280 FreshAir manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
en The illustrations referred to in the text are shown on the fold-out pages at the end of these operating instructions. Before the first use Assembly (see fig. 1) ^ Put the vacuum cleaner in an upright position. ^ Push the handle down into the body of the vacuum cleaner until it engages (see illustration). Activating the exhaust filter change indicator (see fig. 2-6) Depending on the model, one of the following standard exhaust filters is installed (see fig. 2). a Air Clean Filter b ActiveAirClean Filter SF-AA 30 (black) c HEPA AirClean Filter SF-HA 30 (white) If your vacuum cleaner is equipped with a type b or c exhaust filter, you will need to activate the exhaust filter change indicator. ^ Open the lid of the exhaust filter compartment and slightly pull the exhaust filter out of its slot (see fig. 3). ^ Remove the marker strip and then reinsert the exhaust filter (see fig. 4). ^ Press the exhaust filter change indicator ~ (see fig. 5). ^ After about 10-15 seconds, a small red marker will appear in the lefthand side of the display (see fig. 6). ^ Close the lid of the exhaust filter compartment. How the exhaust filter change indicator works (see fig. 7). The exhaust filter change indicator displays the useful life of the exhaust filter. The indicator will turn fully red after approx. 50 hours of operation, which is equivalent to one year of average use. Included accessories (see fig. 8) The following accessories are mounted on the rear of the vacuum cleaner. a Upholstery tool b Crevice nozzle, 12" (300 mm) c Dust brush with natural bristles Attach the accessory you wish to use to the handle on the vacuum hose or the telescopic wand. Upholstery tool For cleaning upholstery, mattresses, cushions, draperies, etc. 9