Miele Scout RX3 Home Vision Operating instructions/Installation instructions - Page 32

YCR-MT12 or AP30 for Scout RX3

Page 32 highlights

en-US  Remove the battery-compartment cover. Scout RX3 (YCR-M05 or AP20)  Replace the batteries. Make sure the polarity is correct.  Close the battery-compartment cover. Replacing the rechargeable battery An original Miele lithium-ion rechargeable battery is required: - YCR-M05 or AP20 for Scout RX3 - YCR-MT12 or AP30 for Scout RX3 Runner and Scout RX3 Home Vision HD  Carefully pull the cords so that the plug connection is pulled out of the slot.  Press the latch on the plug connection in order to release the electrical plug.  Remove the rechargeable battery. The rechargeable-battery compartment is located in the robot vacuum cleaner's storage compartment. Observe the instructions and safety notes regarding the handling and disposal of rechargeable batteries found in the "IMPORTANT SAFETY INSTRUCTIONS" and "Caring for the environment" sections at the beginning of these operating instructions.  Open the storage compartment.  Remove the dust box.  Insert the electrical plug of the new rechargeable battery into the counterpart, making sure it clicks into place.  Insert the rechargeable battery carefully, making sure it is properly positioned (see right-hand side of picture).  Store the plug connection in the side slot.  Open the rechargeable-battery compartment by unlatching the cover upward.  Carefully reinstall the cover of the rechargeable-battery compartment and close it, making sure that it clicks into place. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

en-US
32
Remove the battery-compartment
cover.
Replace the batteries. Make sure the
polarity is correct.
Close the battery-compartment
cover.
Replacing the rechargeable battery
An original Miele lithium-ion recharge-
able battery is required:
-
YCR-M05 or AP20 for Scout RX3
-
YCR-MT12 or AP30 for Scout RX3
Runner and Scout RX3 Home Vision
HD
The rechargeable-battery compartment
is located in the robot vacuum cleaner’s
storage compartment.
Observe the instructions and safety
notes regarding the handling and dis-
posal of rechargeable batteries found
in the “IMPORTANT SAFETY IN-
STRUCTIONS” and “Caring for the en-
vironment” sections at the beginning
of these operating instructions.
Open the storage compartment.
Remove the dust box.
Open the rechargeable-battery com-
partment by unlatching the cover up-
ward.
Scout RX3 (YCR-M05 or AP20)
Carefully pull the cords so that the
plug connection is pulled out of the
slot.
Press the latch on the plug connec-
tion in order to release the electrical
plug.
Remove the rechargeable battery.
Insert the electrical plug of the new
rechargeable battery into the counter-
part, making sure it clicks into place.
Insert the rechargeable battery care-
fully, making sure it is properly posi-
tioned (see right-hand side of pic-
ture).
Store the plug connection in the side
slot.
Carefully reinstall the cover of the
rechargeable-battery compartment
and close it, making sure that it clicks
into place.