Miele Scout RX3 Home Vision Operating instructions/Installation instructions - Page 33

Cleaning and care

Page 33 highlights

en-US Scout RX3 Runner and Scout RX3 Home Vision HD (YCR-MT12 or AP30)  Carefully remove the rechargeable battery using the tab until the plug connection is exposed.  Press the latch on the plug connection in order to release the electrical plug. Cleaning and care  Risk of injury caused by rotating roller brush. The robot vacuum cleaner may start without warning while maintenance work is being carried out. Switch the robot vacuum cleaner off before doing any maintenance work. To switch it off, slide the I/0 switch on the side of the robot vacuum cleaner to the 0 position. Robot vacuum cleaner and accessories  Insert the electrical plug of the new rechargeable battery into the counterpart, making sure it clicks into place.  Store the plug connection in the side recess.  Insert the rechargeable battery carefully, making sure it is properly positioned (see right-hand side of picture).  Risk of electric shock from volt- age. If moisture gets into the robot vacuum cleaner and accessories, there is a risk of electric shock. Do not immerse the robot vacuum cleaner or any accessories supplied with it in water. Observe the special cleaning instructions in the "Maintenance" section. Clean the robot vacuum cleaner and all plastic accessories with a commercially available cleaner suitable for plastic.  Carefully reinstall the cover of the rechargeable-battery compartment and close it, making sure that it clicks into place. Static charge can cause a build-up of dust on the robot vacuum cleaner. This should be removed using a soft, dry cloth. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

en-US
33
Scout RX3 Runner and Scout RX3
Home Vision HD (YCR-MT12 or AP30)
Carefully remove the rechargeable
battery using the tab until the plug
connection is exposed.
Press the latch on the plug connec-
tion in order to release the electrical
plug.
Insert the electrical plug of the new
rechargeable battery into the counter-
part, making sure it clicks into place.
Store the plug connection in the side
recess.
Insert the rechargeable battery care-
fully, making sure it is properly posi-
tioned (see right-hand side of pic-
ture).
Carefully reinstall the cover of the
rechargeable-battery compartment
and close it, making sure that it clicks
into place.
Cleaning and care
Risk of injury caused by rotating
roller brush.
The robot vacuum cleaner may start
without warning while maintenance
work is being carried out.
Switch the robot vacuum cleaner off
before doing any maintenance work.
To switch it off, slide the
I
/
0
switch
on the side of the robot vacuum
cleaner to the
0
position.
Robot vacuum cleaner and acces-
sories
Risk of electric shock from volt-
age.
If moisture gets into the robot vac-
uum cleaner and accessories, there
is a risk of electric shock.
Do not immerse the robot vacuum
cleaner or any accessories supplied
with it in water.
Observe the special cleaning instruc-
tions in the “Maintenance” section.
Clean the robot vacuum cleaner and all
plastic accessories with a commercially
available cleaner suitable for plastic.
Static charge can cause a build-up of
dust on the robot vacuum cleaner. This
should be removed using a soft, dry
cloth.