Miele Swing H1 QuickStep Product Manual - Page 11

en Accessory clip (see fig 8) (standard on some models) ^ If needed attach the accessory clip to the extension / telescopic wand. ^ Push the accessory clip over the cord hook ring. The accessory clip stores the supplied crevice nozzle and upholstery nozzle (see fig. 9). Use The power cord will be guided so that it does not hinder vacuuming. It also prevents it kinking at the connection to the vacuum cleaner. Turning the vacuum cleaner on and off (see fig. 13 + 14) There are two slide switches located on the handle to turn the vacuum cleaner on and off easily whether the vacuum cleaner is used upright or horizontally. Either of these slide switches can be used to operate the vacuum cleaner. Unwinding the power cord (see fig. 10) The lower cord hook rotates. ^ Turn the cord hook upwards to remove the power cord. Adjusting the telescopic wand (see fig. 11) (depending on model) One piece of the telescopic wand is stored inside the other and can be adjusted to suit your height for comfortable vacuum cleaning. ^ Press the telescopic wand release button (see arrow) to release the tubes and adjust to the required height. Plugging the vacuum cleaner in (see fig. 12) ^ Plug the vacuum cleaner in. ^ While vacuuming, hang the cord over the hook on the handle (see insert). Double slide switch 0 = vacuum cleaner is off min. = minimum suction Select min. for vacuuming light weight items such as throw rugs or curtains. max. = maximum suction The highest setting should be used if a Turbobrush is connected to the vacuum cleaner. ^ To turn the vacuum cleaner on, slide either switch to max. ^ To turn the vacuum cleaner off, push the slide switch to 0 until it clicks. Adjusting the rug and floor tool to the floor type (see fig. 15 + 16) The rug and floor tool has been designed to give excellent cleaning results on either carpeted or smooth floors. For other floor coverings, we recommend the use of special Miele brushes (see "Optional Accessories"). 11