Miele Swing H1 QuickStep Product Manual - Page 16

en Cleaning the floor roller of the floor brush AllTeQ, see fig. 34 (depending on model) a Release the roller pin using a coin. b Push and take out the roller axle. c Take out the roller. Frequently asked questions The vacuum cleaner shuts off automatically. If the vacuum cleaner has overheated the temperature limiter will automatically turn off the vacuum cleaner. Remove all threads, hair etc. and reinstall the roller and lock the roller pin. Cleaning and care ,Turn off the vacuum and unplug it from the outlet before performing any maintenance work. Vacuum cleaner and accessories The vacuum cleaner and other plastic accessories can be cleaned with a damp cloth or a cleaner suitable for plastics. This can occur if, for example, large articles block the suction tube or when the filter bag is full or contains particles of fine dust. A heavily soiled exhaust or dust compartment filter can also be the cause of overheating. In this case, turn off the vacuum cleaner and unplug it from the outlet. Once the cause has been addressed, allow the vacuum cleaner to cool for approx. 20 - 30 minutes before resuming vacuuming. Technical Service ,Do not use abrasive, oil-based, glass or all purpose cleaners! Dust compartment The dust compartment can, if necessary, be cleaned using a dry cloth, dusting brush or a second vacuum to remove any dust. In the event of a fault which you cannot fix yourself please contact the Miele Service Department at the phone number listed on the back of this booklet. ^ Please quote the model type of your appliance. This can be found on the data plate on the bottom of the vacuum. ,Do not submerge the vacuum in water. If moisture gets into the appliance there is the risk of an electric shock. 16