Motorola 4652 Getting Started Guide - Page 31

Easy Setup 6-31 Quick Easy Setup Connection Path This section may be all you need to do to configure your Netopia 4652 SDSL/IDSL Router. Your service provider will supply you with several parameter values. Below is a handy checklist: Line type Data Link Encapsulation Data Circuit VPI Data Circuit VPI Address Translation Enabled: IP Addressing: (for PPP DLEs only) PPP Authentication: DSL Line Configuration Screen ❑ SDSL-ATM (default) (for SDSL-ATM only) Operation Mode: or ❑ SDSL-HDLC or ❑ IDSL (requires reboot) ❑ PPP (default) or ❑ RFC1483 or (for SDSL-HDLC and ISDL Line Types only) ❑ Frame Relay PPP Mode: ❑ VC Multiplexed (default) or ❑ LLC SNAP RFC1483 Mode (SDSL-ATM Line Type only): ❑ Bridged 1483 (default) or ❑ Routed 1483 PPP over Frame Relay Enabled: ❑ Off (default) or ❑ On or (for ISDL Line Type only) ❑ HDLC 0-255 (0 is default) 0-65535 (38 is default) Easy Setup Profile Screen ❑ Yes (default) or ❑ No ❑ Numbered (default) or ❑ Unnumbered (for Numbered IP Addressing) Local WAN IP Address: Local WAN IP Mask: ❑ None (default), ❑ PAP or ❑ CHAP (for PAP or CHAP) User Name (or Host Name ❑ Generic ❑ Lucent ❑ Nokia EOC Fast ❑ Nokia Fixed ❑ Paradyne ❑ Nortel UE IMAS Data Rate (for Bridged 1483 only) PPP over Ethernet (PPPoE) ❑ Off (default) or ❑ On DLCI LMI: ❑ ANSI (Annex D) ❑ CCITT (Annex A) ❑ LMI ❑ None (for Unnumbered IP Addressing) Remote IP Address Remote IP Mask for PAP or CHAP) Password (or Secret