Motorola HMEZ1000 Quick Start Guide - Page 8

Quick Start Guide Easy Start Kit Profile Setup Overview To create a profile, you first have to set up the SMTP (Simple Mail Transfer Protocol) information necessary for transmitting the alerts. Then, you have to configure a profile using the information you entered in SMTP setup. Determining Your E-Mail (SMTP) Server Name This section enables you to learn your Outgoing Mail (SMTP) server information if you are using Outlook Express 6.0. If using a different version, the steps may vary. You can also contact your ISP (Internet Service Provider) as they will have this information. The Motorola Home Monitoring & Control System User Guide has a short listing of popular ISP SMTP server names as well. 1 Start Outlook Express. 2 Select Accounts... from the Tools menu. The Internet Accounts window is displayed. 3 Click the Mail tab. 4 Click your Mail Sever Account, for example, mail.comcast.net, from the list and click Properties. The Properties window is displayed. 5 Click the Servers tab. 6 Write down your Outgoing mail server (SMTP), for example smtp.comcast.net. This server name must be entered into the Motorola Home Monitor software by clicking on the Event Setup button in the Motorola Home Monitor program. 7 Click Cancel and then Close. SMTP Setup 1 Return to the Motorola Home Monitor program and click Event Setup from the main menu of the MHM program. 2 Click Edit SMTP Info. 3 Enter the Outgoing Mail (SMTP) and your E-Mail Address necessary for your mail server. If your server requires authentication, select the checkbox and enter the necessary information. The Account Name and Password are for your Authentication Server, if using one. 4 Click OK when finished. You are now able to set up profiles to send event notifications. Profile Setup 1 Click Event Setup from the main menu of the MHM program. If prompted for SMTP, see SMTP Setup and then complete the instructions here. 2 Click Edit Profiles. 3 Select the Notification Type. 4 Enter an E-mail Address. 5 Click Add. The Profile configured displays in the Profiles List. You will now be able to select this profile when setting up an event action. 6 Click Done to exit. Page 6