Motorola HT820 User Manual - Page 2

Features and Functions Guide HT820 Bluetooth® Stereo Headphones IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your HT820. 1 PAIR with YOUR PHONE START BLUETOOTH Feature Your phone's Bluetooth feature is off by default. So, to use your headset, you must turn on the Bluetooth feature in your phone. For most Motorola phones: 1 Select M (Menu) > Settings > Connection > Bluetooth Link > Setup. 2 Scroll to Power. 3 Press Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth feature. Bluetooth feature remains on until you turn it off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. Step A PUT HEADPHONES IN PAIRING Make sure your headphones are turned off. If your headset is on, turn it off by pressing and holding the left side Call m button until the indicator light flashes 3 times (about 3 seconds). Music Button with Indicator Light (Right Side) Call Button with Indicator Light (Left Side) 3 Note: For more details, see "Pair," Step 1 on the reverse side of this 4guide. Step B SET THE PHONE TO LOOK FOR YOUR HEADPHONES For most Motorola phones: 1 Select M (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists all Bluetooth devices it finds. 2 Select Motorola HT820. 3 Press OK or Yes to pair (link) the handsfree device. 4 Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000. When your headphones are successfully paired with your phone, the blue indicator light rapidly flashes and then resumes regular flashing. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. 2 TEST AND USE Your Headphones & Phone Your phone and headphones are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: 1 Place the headphones over your ear. See Wear the Headset on the reverse side of this guide. 2 On your phone, dial the number you want to call and press the Send key. 3 If your phone and headphones are successfully paired, you will hear ringing in the headphones. See Make Calls for details regarding answering and ending calls using the headset. After you have successfully paired your phone and headphones, you do not need to repeat these initial setup steps each time you use the headphones. Just turn the power on and they will automatically connect. FOR MORE INFORMATION ON USING YOUR MOTOROLA HT820 Visit us at www.hellomoto.com/bluetooth and click Support. SUPPORT If you need more help, contact us at 1-877-MOTOBLU. This symbol on a Motorola product means the product should not be disposed of with household waste. Please do not dispose of mobile telephones or electric accessories, such as chargers or headsets, with your household waste. MAKE CALLS Function Action Make a voice dial call Short press left m button & speak the name after the tone End a call Short press left m button Receive a call Short press left m button Reject a call Long press left m button until ringing stops. Call ignored. Redial last call Long press left m button Answer a second incoming call Press and hold the Call button (places first call on hold) Note: Your HT820 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. MAKE CALLS CONTINUED Function Action Use Call Waiting Long press left m button, 1st call put on hold. 2nd call becomes active. Join a 3-way call (Note: Feature is phone/ network dependent.) Press both volume buttons + at the same time. Both calls become active. Put an active call on hold or resume a call on hold Long press left m button Mute a call Press the volume buttons + at the same time. Unmute a call Press either the + or the to unmute the mic. INDICATOR LIGHTS The indicator light provides information about your headphone status. With the Charger Plugged In Headphone Indicator Status On (steady) Charging Off Charging complete With No Charger Plugged In Headphone Indicator Status Off Power off On (steady) Pairing mode 10 rapid flashes Pairing successful Slow pulse Connected . To turn off the indicator lights, press both < and > at the same time. To turn the indicator lights back on, press both at the same time. AUDIO TONES The audio tones provide information about your headphone status. Audio Tone Single high tone when pressing volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone Single high tone Low to high tone Two tones Single tone Headphone Status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute on / off Power on / off