Motorola L803 User Guide - Page 42
De-register all handsets
View all Motorola L803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
take about 10 seconds to complete the registration. The handset will display HANDSET X REGISTERED, with X denotes the handset number (1-6). There will be a beep sound if the registration is successful. NOTES 1. If the registration is not successful, the display will show NOT REGISTERED. To reset the handset, remove the handset from the telephone base and place it back in. Try the registration process again. 2. You cannot register a handset if any other system handset is in use. 7.2 De-register all handsets You may need to de-register your handsets if: You have five registered handsets and need to replace a unit. OR You wish to change the designated handset number of your registered handsets. You must first de-register ALL the handsets, and then reregister each handset you wish to use. Please read carefully through all the instructions on this page before beginning the de-registration process. a 1. Press and hold on the telephone base for about 10 2. seconds (until the IN USE light turns on and starts to a flash quickly), then release the button. a Immediately press and release again. You must a press while the IN USE light is still flashing. (The light flashes for about seven seconds. If the light stops flashing, pick up the handset and place it back into the telephone base, then start again with step one above.) 3. The handset(s) will show SEARCHING FOR BASE and it will take about 10 seconds to complete the de-registration process. ALL handsets will show NOT REGISTERED if de- registration was successful. 4. To re-register the handset(s) to the telephone base, follow the registration instructions as section above. NOTES 1. If the de-registration process was not successful, you may need to reset the system and try again. To reset: pick up the handset and press the < button, then press 42 Registration