Motorola MBP30 User Guide - Page 10
Registration - camera
View all Motorola MBP30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2.4 Registration The baby monitor is already pre-registered upon your purchase. You do not need to register it again unless the baby unit loses its link with the parent unit. Up to 4 baby units can be registered to one parent unit. If you have more than one baby unit, please check that you have selected the correct channel at the Parent unit for that baby unit before you attempt to register it again. To re-register your baby unit, or register a new baby unit, follow the procedure below: 1. Switch off the baby unit and remove the small power plug from the baby unit. 2. On the Parent unit, press to enter menu mode. ( ) 3. Press or until is selected on the LCD screen. + - 4. Press or to select the camera channel ( 1/ 2/ 3/ 4) that you want the baby unit to pair with. 5. Press to start registration. is displayed during the pairing process. 6. Switch on the baby unit. Wait 16 seconds for the parent unit to locate the baby unit and pair it to the selected channel. A will be displayed on the LCD screen if the registration is successful. If no baby unit is found, a will be displayed on the LCD screen. Switch the baby unit off and on and repeat the registration procedure. 10 Getting started