Motorola MK2200-0N0SCKBWT0R Reference Guide - Page 95

Remote Device Manager 4 - 13 6. Select Tools > Push Configuration File option to upload the configuration file to the selected MK22X0s (see Downloading the Configuration File to the MK22X0 Using the RDM). Downloading the Configuration File to the MK22X0 Using the RDM To "push" the file to the MK22X0(s): 1. In the Symbol Remote Device Manager (RDM) window, select/highlight the MK22X0(s) to receive the configuration file. 2. Select Tools > Push Configuration File. 3. Select the configuration file to send, then click Open. The row color of the selected device changes to yellow to indicate that the MK22X0 device is ready to receive a configuration file through the RDM. When the download completes, the row color changes to green. See Row Colors on page 4-8 and State Icons on page 4-8. 4. If the Auto reboot after download option is disabled, manually cold boot the MK22X0(s). In the RDM main screen, select the MK22X0(s) to reboot, then select Actions > Cold Boot. Allow approximately one minute for the MK22X0 to reboot and reconnect, then select View > Refresh to verify the device rebooted successfully. NOTE Setting the device FTP options to Enable Anonymous Login and Disable User Authentication allows anonymous login and retrieval of files through FTP connection. However, modifying/adding files is not allowed for non-anonymous users. Therefore, do not enter a user name and password in RDM's options panel to download a file to the device through RDM if these FTP settings are in place. Setting RDM Options If desired, set the following Symbol Remote Device Manager (RDM) options from the Options window. These settings apply for the RDM: • AirBeam parameters • FTP security • Timeouts • Auto-refresh • 3rd party application data • Other options (e.g., auto-reboot, device discovery).