Motorola RDV5100 User Guide - Page 54
Further details on how to clone radios are, explained in the Instructions Sheet provided, with
UPC - 723755540286
View all Motorola RDV5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
PROGRAMMING FEATURES • Wait for 3 seconds before releasing the buttons until a distinctive audible tone is heard. 3. Place the Source radio in the source pocket that pairs with the target pocket you chose in step 1. Press and release SB1. 4. After cloning is completed, the Source radio will sound either a 'pass' tone (cloning was successful) or a 'fail' tone (cloning process has failed). The 'pass' tone sounds like a good key 'chirp' whereas the 'fail' tone sounds similar to a 'bonk' tone. If the Source radio is a display model, it will either show 'Pass' or 'Fail' on the display (a tone will be heard within 5 seconds). 5. Once you have completed the cloning process, turn the radios OFF and ON to exit the 'cloning' mode. • If cloning fails please refer to "What To Do if Cloning Fails" on page 54. Further details on how to clone radios are explained in the Instructions Sheet provided with the MUC. When ordering the MUC, please refer to P/N RLN6309. Notes: • Paired Target radios and Source radios must be of the same band type in order for the cloning to run successfully. • (*) MUC pockets numbers should be read from left to right with the Motorola logo facing front. English 52