Motorola SB5100 Installation Manual - Page 61
Solutions, My Computer, Properties, Composite Device, USB Cable Modem, Other, Devices, Unknown Devices - reviews
UPC - 612572073193
View all Motorola SB5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Installation and Operation 3-47 Solutions If you choose not to run the Motorola Remove program, you can perform the procedures in Solution 1 or Solution 2. Review both solutions before choosing which one to run. Solution 1 1 Leave the USB cable plugged into the SURFboard cable modem and the computer. 2 From the Windows Desktop, right-click the My Computer icon to display a list of options. 3 Click Properties at the bottom of the list. The System Properties window is displayed. 4 On the System Properties window, click the Device Manager tab. 5 Expand the Universal Serial Bus controllers branch and see if there is an entry for USB Composite Device. The following additional entries are automatically removed when the USB Composite Device is removed: # Windows 98 Second Edition may list two entries as USB Cable Modem under Other Devices. # Windows 98 may list two entries as Unknown Devices under Other Devices. These additional entries are automatically removed when the USB Composite Device is removed. 6 Select the USB Composite Device and click Remove. CAUTION! Extremely Important: After removing the USB composite device, disconnect the USB cable from the SURFboard cable modem and reboot the PC. To reinstall the USB drivers, follow the instructions in "Setting Up a USB Driver for Windows 98", page 3-5 SURFboard Cable Modem Installation Manual