Motorola SBG6580 User Manual - Page 14
Wall Mounting the Modem, device NIU/NID. - cable modem gateway
View all Motorola SBG6580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
B Wall Mounting the Modem If you choose to mount the wireless modem on a wall, do the following before starting: • Locate the unit as specified by the local or national codes governing residential or business cable TV and communications services. • Follow all local standards for installing a network interface unit/network interface device (NIU/NID). • Disconnect the AC power plug is from the wall outlet and verify that all cables are removed from the back of the modem before starting the installation. • Decide if you are mounting the modem horizontally or vertically. • Gather the following items: Wall-mounting template Applicable screwdriver: Phillips or flathead Two M3.5 (#6) screws with a flat underside and maximum screw head diameter of 9.0 mm to mount the gateway. Note: Contact a qualified installer to determine the appropriate screw length needed for mounting the gateway. See the dimensioned view below for the spacing needed between the screw head and wall: 2.6 mm (0.10") maximum screw head thickness 9.0 mm (0.35") maximum screw head diameter 2.5 mm (0.10") minimum screw head to wall spacing Note: If possible, mount the modem to concrete, masonry, a wooden stud, or some other solid wall material. Use anchor bolts if necessary (for example, if you mount the unit on drywall). Installing the Modem • Motorola SURFboard • User Guide 6