Motorola TK30 TK30 - User Guide - Page 5

Installation Before you begin Caution: Only qualified personnel should install this car kit. Because of the wide variety of vehicle types and models, it may be necessary to contact the vehicle manufacturer for detailed installation information. Caution: An air bag inflates with great force. Do not place objects, including communication equipment, in the area over the air bag or in the air bag deployment area. If the communication equipment is improperly installed and the air bag inflates, serious injury could occur. If needed, contact the vehicle manufacturer for air bag information specific to the vehicle. Please follow these guidelines: • Mount components securely on strong surfaces to prevent shifting that could cause injury or interfere with safe vehicle operation. Use the supplied mounting hardware as needed. • Mounted components and attached wires or cables must not interfere with seating or leg space. • Route cables so they are protected from pinching, sharp edges and crushing. Keep all in-line connectors easily accessible. • The car kit is intended for use in 12 Volt negative ground systems only. The car kit draws less than 10 Amps. Confirm that the vehicle's electrical system can supply this current. Install the vehicle integration kit The vehicle integration kit is the central connection point for the car kit. Connections to the vehicle, microphone, audio input device, and user interface module (UIM) are made from the vehicle integration kit. The vehicle integration kit should be secured to the vehicle after the rest of the car kit components are installed and cables are secured Installation 3