Motorola WPS870G User Guide - Page 80
Choose Calibrated Color/Grayscale in - driver download
UPC - 612572107973
View all Motorola WPS870G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
User Guide WPS870G My EPS file does not print with the correct fonts. This is a problem that occurs in some application programs. Try downloading the fonts contained in the EPS file before printing the saved EPS file. I cannot select the "Remaining from:" item in the print dialog box. If you have selected the Layout value, "2 Up," or "4 Up," you cannot access the Remaining from item. Choose other selections. A cover page prints either on the first or the last page of the document. Select one of these solutions: Turn the cover page feature off in your printer driver. Insert extra page breaks in your document to avoid the cover page printing on the first or last page of your document. The colors on my printed output do not match the colors on my computer screen. When the printer receives a color file, it tries to match the printed output color to the screen color. Sometimes the printer cannot match up the colors as closely as desired. To alleviate this problem, perform the following steps: Choose "Calibrated Color/Grayscale" in the Print pop-up menu in the Print Options dialog box. The printer makes adjustments to match the colors. Check your monitor to ensure all settings (for example, brightness) are adjusted correctly. Use calibration software, available from other vendors. When I send a print job, I get a PostScript Command error or no printout. Check the communication protocols. The computer, Wireless Print Server, and printer must all be configured to the same communication protocol (either Binary or ASCII). To configure your system: 1 Choose which protocol you are going to use. You should check your printer as it may only use one certain protocol. 2 Set your printer to the desired protocol. 3 Use the computer's Print submenu to configure your computer to use the protocol you have chosen. 4 Configure the Wireless Print Server to use the same protocol as the printer and computer. My printer doesn't show up in the list of available printers during installation. If you are using an USB-enabled print driver to connect your printer to the Wireless Print Server, you might need to download and use an Ethernet-enabled print driver. You will also need to use IP Printing (LPR) if you use an Ethernet print driver. See LPR Printing Setup. PAGE 73