Motorola moto e5 play User Guide T-Mobile - Page 4
Insert the SIM and microSD cards, Remove the back cover, Put in the cards
View all Motorola moto e5 play manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Insert the SIM and microSD cards To activate phone service, you might need to insert a SIM card, or this may have been done for you. You can also add a microSD card, which is optional and sold separately. Remove the back cover To insert SIM and memory cards, remove the back cover. Caution: Don't use tools to remove the cover-doing so may damage your phone. Take off the back cover. Put your finger in the notch at the bottom corner of the back cover and pry off the cover. Put in the cards Caution: Make sure you use the correct size SIM card and don't cut the SIM card. Don't use tools to remove the battery-doing so may damage your phone. Insert the SIM card first, then insert an optional microSD card. 1. SIM (gold contacts facing down) 2. microSD (optional, sold 2 1 separately) Nano SIM Caution: Do not pull the USB port part to remove the back cover. SIM card insert graphic. After the battery is removed, the SIM card is inserted in the slot on the left with the clipped corner to the upper left. The SDcard is inserted in the left slot. Push the SIM card down from the top of the slot, then pull the card from the bottom to remove it. Back cover removal graphic. Remove the back cover starting at the small opening on the lower left corner [looking at it from the back]. Lift the battery up and out from the bottom. SIM card remove graphic. Push the SIM card down from the top of the slot, then pull the card from the bottom to remove it. Get Started