Mr. Coffee BVMC-KNX23 User Manual - Page 8

This is due to the minimum absorption of water by the

coffee grounds.

7. Lift the brew basket lid and pour the water into the

water reservoir. Close the lid and place the empty

decanter onto the warmer plate.

CAUTION:

Make sure the decanter is fully placed on the

warming plate or the water and the grounds will overflow

from the filter basket. An overflow may cause personal

injury or damage to property.

CAUTION!

To reduce the risk of damaging the

decanter and/or the risk of personal injury, do not

add cold water to the decanter if the decanter is

already hot. Allow the decanter to cool before using.

BREWING COFFEE NOW

1. After completing the steps

in the “

Adding Water and

Ground Coffee

” section and

with the decanter and the

filter basket securely in place,

turn the coffeemaker on by

pressing the SELECT button

once. The Brew Now green light will turn

on and pulse to signal that the coffeemaker is on and

brewing (Figure 5).

2. To enjoy a more full flavored

cup of coffee, press the

STRONG BREW button once.

The STRONG amber light will

turn on (Figure 6).

3. The coffeemaker will beep

3 times when brewing is

complete. The green Brew

Now Indicator will stay on for 2 hrs to

show that the warming plate is on.

After 2 hrs it will

automatically shut off and the coffeemaker will beep 3

times.

Note:

Warming plate will be hot for those 2 hrs.

Tip:

To turn off the beep function, press and hold Set

Delay button for 5 seconds. It will beep to indicate the

function is turned off. To activate the beep function,

press the Set Delay button and hold for 5 seconds. It

will beep twice to indicate that the beep function is

activated again.

4. After the used coffee grounds have cooled, carefully

remove the filter basket and discard them.

CAUTION:

The shower head cover is hot after brewing.

Always allow the coffeemaker to cool down before cleaning.

5. Make sure the decanter is empty before starting to

brew coffee.

6.

Be sure to turn your coffeemaker off when no longer using it.

BREWING COFFEE LATER

1. You must first set the time when you would like the

coffeemaker to begin brewing your coffee as described

in “Setting the Clock and the Delay Brew Timer” section.

2. Prepare your coffeemaker as described in “Adding Water

and Ground Coffee” section.

3. To activate DELAY BREW and program your coffeemaker to

brew coffee at a later time, press the Select / Off button

twice (Figure 7). The amber Set Delay light will turn on.

The coffeemaker is now set to automatically brew coffee

at the pre-set later time. At this time, if you would like a

strong brew, you can press the STRONG Brew button to

activate. Note: The coffeemaker will remain in strong brew

until you change it back to regular strength by pressing

the Strong Brew button or until you unplug the machine.

4. At the pre-set time, the green BREW NOW light will

turn on and the DELAY BREW amber light will turn off,

indicating the brewing has started in the selected brew

strength.

5. The coffeemaker warmer plate will keep your coffee hot

for 2 hours and then automatically turn off.

14

15

Figure 5

Figure 6

BVMC-KNX_16ESM1.indd

15-16

4/1/16

9:42 AM

Mr. Coffee BVMC-KNX23 User Manual - Page 8

Brewing Coffee Now, Brewing Coffee Later

Page 8 highlights