Mr. Coffee BVMC-SC100 User Manual - Page 12

CLEANING AND MAINTAINING YOUR SINGLE SERVE 1.0 Cleaning External Parts CAUTION: Make sure the Brewer is unplugged before cleaning. Regular cleaning of the Brewer's external components is recommended. 1. The Housing and other external components may be cleaned with a soapy, damp, non-abrasive cloth. CAUTION: Never immerse the Brewer in water or other liquids. 2. The Drip Tray can accumulate liquids. The Drip Tray and Drip Tray Plate should be periodically inspected and cleaned with a damp soapy nonabrasive lint free cloth. The Drip Tray and Drip Tray Plate should not be put into the dishwasher. To remove the Drip Tray Assembly, simply slide it toward you, keeping it level at all times to avoid spilling. Cleaning the K-Cup® Pack Holder Assembly 1. C leaning the Parts - The K-Cup® Pack Holder Assembly can be placed onto the top shelf of a dishwasher. NOTE: Use low temperature cycles in the dishwasher. To remove from the Brewer, pull forward the front face of the Brewer. Grasp the top of the K-Cup® Pack Holder with one hand while pushing up on the bottom of the K-Cup® Pack Holder from underneath with the other until it releases. After cleaning, align the K-Cup® Pack Holder with the opening using the two front ribs as a guide, and snap into place from the top. 2. C leaning the Funnel - The Funnel can be removed from the K-Cup® Pack Holder by pulling on it until it snaps off (fig. 1). The Funnel is dishwasher safe. To replace it, just snap it back onto the K-Cup® Pack Holder Assembly. FIGURE 1 ! 3. Cleaning the Exit Needle - The Exit Needle is located on the inside bottom of the K-Cup® Pack Holder Assembly. 12