NEC 8M-B120C 8M-B120C Operation Manual - Page 114

Device

Page 114 highlights

Contents 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. Connecting Other Devices 1. Connecting 8K Output- compatible Device/Quad-screen display(4K or less) 5. Connecting 4K Output- compatible Device 7. Viewing HDR Video (INPUT1, INPUT7, INPUT8) 9. Using the HDMI CEC 11. Connecting Recorder, Player, etc. 21. Connecting Audio Device 22. Connecting PC 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting > Connecting Other Devices < Connecting PC When the monitor is connected to a PC with DVI output terminal (digital connection) • Be sure to use the supplied conversion cable. When using any conversion cable other than the supplied one, the Monitor may not operate properly, or breakages may occur. • A commercially available DVI / HDMI conversion cable and an audio cable are required. • Use an audio cable that is compatible with the terminal of PC. • The HDMI terminal of the Monitor, and the PC DVI terminal with a conversion cable, the PC screen may not be displayed properly or completely. This is because the cable does not sufficiently meet HDMI standards. • "This input signal is not supported" message will be displayed when an unsupported signal is input. In such situation, refer to the operation manual of the connected PC and change to the supported signal. • After switching to INPUT 1, select "Setup" - " (Option)" -"Terminal setting" - "INPUT1 audio setting" from the Menu, and then select "Analog audio input". 5-27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141

Contents
1.
Part Names
2.
Basic Operation
3.
Menu Operation
4.
USB Media
5.
Connecting Other
Devices
1.
Connecting 8K Output-
compatible
Device/Quad-screen
display
4K or less)
5.
Connecting 4K Output-
compatible Device
7.
Viewing HDR Video
(INPUT1, INPUT7,
INPUT8)
9.
Using the HDMI CEC
11.
Connecting Recorder,
Player, etc.
21.
Connecting Audio
Device
22.
Connecting PC
6.
Operating the Monitor
Using a PC (IP control)
7.
Troubleshooting
Connecting Other Devices
Connecting PC
When the monitor is connected to a PC with DVI output terminal (digital connection)
Be sure to use the supplied conversion cable. When using any conversion cable other than the supplied one, the Monitor may not operate properly, or breakages may occur.
A commercially available DVI / HDMI conversion cable and an audio cable are required.
Use an audio cable that is compatible with the terminal of PC.
The HDMI terminal of the Monitor, and the PC DVI terminal with a conversion cable, the PC screen may not be displayed properly or completely. This is because the cable
does not sufficiently meet HDMI standards.
"This input signal is not supported" message will be displayed when an unsupported signal is input. In such situation, refer to the operation manual of the connected PC and
change to the supported signal.
After switching to INPUT 1, select "
Setup
" - "
(
Option
)" -"
Terminal setting
" - "
INPUT1 audio setting
" from the Menu, and then select "
Analog audio input
".
5-27