NEC 8M-B120C 8M-B120C Operation Manual - Page 88
Connecting Other Devices
View all NEC 8M-B120C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Contents 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. Connecting Other Devices 1. Connecting 8K Output- compatible Device/Quad-screen display(4K or less) 5. Connecting 4K Output- compatible Device 7. Viewing HDR Video (INPUT1, INPUT7, INPUT8) 9. Using the HDMI CEC 11. Connecting Recorder, Player, etc. 21. Connecting Audio Device 22. Connecting PC 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting > Connecting Other Devices < Connecting 8K output compatible Device/Quad-screen display(4K or less) • Connects the Monitor to 8K output (7680 × 4320 of resolution output) compatible equipment by using 4 HDMI cables. • When connecting an 8K output compatible device to the Monitor, use commercially available premium HDMI cables. • Connect the devices properly so that the output signal from the device can be displayed at the appropriate position. Video images from the HDMI input terminal are displayed at the position as shown on the right (default). • Multi-screen display by using 8K signal is not supported. • In MODE2, 8K display is possible whenever any input signal to INPUT 7 (A to D) is synchronized. • Under the factory default setting, INPUT7-A is set as the sound input. • To change the factory default setting, switch to INPUT7, select "Setup" - " (Option)" - "Terminal setting" - "INPUT7 audio setting" from the Menu, and then select input for audio sound. • Read the operation manual on the device to be connected to the Monitor as well. ◆Important◆ • Use / connect four HDMI cables of the same type and brand, otherwise performance cannot be guaranteed. • In Mode2, input the format 3840×2160 (24Hz, 25Hz, 30Hz, 50Hz, 60Hz) to each terminal of INPUT 7 (A to D). If any format other than the above is input, the video or picture may be distorted. 5-1