NEC AS125F AccuSync 125F User's Manual - Page 14

Specifications Monitor Specifications Picture Tube Input Signal Sync: Diagonal: Viewable Image Size: Radius: Video: Separate sync. TTL Level Display Colors Analog input: Synchronization Range Horizontal: Vertical: Resolutions Supported Resolution based on horizontal and vertical frequencies only Active Display Area (Factory Setting) Active Display Area (Full Scan) Power Supply Current Rating Dimensions Horizontal: Vertical: Weight Environmental Considerations Operating Temperature: Humidity: Altitude: Storage Temperature: Humidity: Altitude: AccuSync™125F Monitor 22 inch/55 cm 20 inch/51cm 50000 mm ANALOG 0.7 Vp-p/75 Ohms Notes 90° deflection, 0.24 mm grille pitch, medium short persistence phosphor, aperture grille CRT, G-WARAS coating Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Composite sync. (Positive/Negative) (TTL Level) Unlimited number of Colors Depends on display card used. 30 kHz to 96 kHz 50 Hz to 160 Hz Automatically Automatically 640 x 480 @ 50 to 160 Hz Some systems may not support 720 x 400 @ 50 to 160 Hz all modes listed. 800 x 600 @ 50 to 152 Hz 1024 x 768 @ 50 to 120 Hz 1152 x 870 @ 50 to 105 Hz 1280 x 1024 @ 50 to 89 Hz NEC cites recommended resolution at 1600 x 1200 @ 50 to 76 Hz 85 Hz for optimal display performance. 396 mm/15.6 inches 297 mm/11.7 inches Dependent upon signal timing used, and does not include border area. 406 mm/16.0 inches 305 mm/12.0 inches Dependent upon signal timing used, and does not include border area. AC 100 - 120 V / 220 - 240 V, 50/60 Hz 1.3A @ 100 - 120 V / 0.6A @ 220 - 240 V 495 mm (W) x 493.5 mm (H) x 473 mm (D) 19.5 inches (W) x 19.4 inches (H) x 18.6 inches (D) 29.7 kg 65.5 lbs +10°C to +35°C/+50°F to +90°F 30% to 80% 3,000 m/10,000 Feet -20°C to +60°C/-4°F to +140°F 10% to 90% 15,000 m/50,000 Feet NOTE: Technical specifications are subject to change without notice. "DDV4ZOD' 12 12 01.12.12, 8:43