NEC E321 MultiSync LCD5710-2-AV : WMK-3257 accessory guide
NEC E321 Manual
 |
UPC - 805736032819
View all NEC E321 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC E321 manual content summary:
- NEC E321 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 1
Installation and Assembly - Flat Screen Wall Mount for NEC models: NEC DISPLAY SOLUTIONS OF AMERICA, INC. ASPV32, ASPV40, E321, E421, E461, LCD3210, LCD3215, LCD4020, LCD4215, LCD4615, LCD4620, LCD5220, LCD5710, M40, M46, P401, P461, P521, P551, S401, S461, S521, SC40, SC46, V321, V421, V461, X461HB - NEC E321 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 2
1-800-865-2112. • This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions. • Make sure that the supporting surface will safely support the combined load of the equipment and all attached - NEC E321 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 3
Needed for Assembly • stud finder ("edge to edge" stud finder is recommended) • phillips screwdriver • drill • 1/4" bit for concrete and cinder block wall • 5/32" bit for wood stud wall • level Accessories • 4 piece Metal Stud Fastener Kit (ACC 415) (Not UL listed) Before you begin, make sure all - NEC E321 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 4
Stud Wall WARNING • Installer must verify that the supporting surface will safely support the combined load of the the four mounting holes. Make sure that the mounting holes are on the stud centerlines. Drill four 5/32" (4 mm) dia. holes 2-1/2" (65 mm) deep. Make sure that the wall plate is level - NEC E321 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 5
of the block. Cinder block must meet ASTM C-90 specifications. It is suggested that a standard electric drill on . • Make sure that the supporting surface will safely support the combined load of the equipment than 5/8", custom fasteners must be supplied by installer. (not evaluated by UL) 1 Drill - NEC E321 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 6
Screen P401 P461 P521 P551 S401 S461 S521 SC40 SC46 V321 V421 V461 X461HB X461UN ScrewSize M6x12 M6x12 M6x12 M6 L fig 2.1 CENTER MOUNTING LOCATIONS Installing Tilt Brackets MAX Distance 400 mm cloth on a flat, level surface that will support the weight of the screen. Place screen face - NEC E321 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 7
& C) onto wall plate (A) and swing screen down as shown in fig. 3.1. Tilt bracket hooks must fully engage wall plate. Using phillips screw driver or security allen wrench (F), turn safety/security screws on tilt brackets (B & C) clockwise till screw tip securely contacts wall plate as shown in cross
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
ISSUED: 03-26-10
SHEET #: 125-9106-3
08-04-10
Maximum UL Load Capacity: 150 Ib (68 Kg)
±²³´µ¶·¸¹º»´·¼¹½¾¶¼±·´¼¿´ºÀ²Á¶³ºÂ´¶±³Ã
Model:
WMK3257
Installation and Assembly - Flat Screen Wall
Mount for NEC models:
ASPV32, ASPV40, E321, E421, E461,
LCD3210, LCD3215, LCD4020, LCD4215,
LCD4615, LCD4620, LCD5220, LCD5710,
M40, M46, P401, P461, P521, P551, S401,
S461, S521, SC40, SC46, V321, V421, V461,
X461HB, X461UN
±
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.