NEC E437Q External Controls - Page 14

Get parameter reply

Page 14 highlights

5.2 "Get parameter" reply STX Result OP code OP code Type Max value Current Value ETX page Hi Lo Hi Lo Hi Lo Hi Lo MSB LSB MSB LSB 1st 2nd-3rd 4th-5th 6th -7th 8th -9th 10th -13th 14th -17th 18th The monitor replies with a current value and the status of the requested item (operation code). 1stbyte) STX: Start of Message ASCII STX (02h) 2nd-3rdbytes) Result code. These bytes indicate a result of the requested commands as follows, 00h: No Error. 01h: Unsupported operation with this monitor or unsupported operation under current condition. This result code from the monitor is encoded to ASCII characters. Result code is always 00h(No Error). Because monitor does not reply any command to the controller when monitor gets an unsupported command on Exx7. Ex.) The byte data 00h is encoded to ASCII character '0' and '0' (30h and 30h). 4th-5thbytes) OP code page: Operation code page. These bytes indicate a replying item's OP code page. This returned value from the monitor is encoded to ASCII characters. Ex.) The byte data 02h is encoded to ASCII character '0' and '2' (30h and 32h). Refer to the operation code table. 6th-7thbytes) OP code: Operation code These bytes indicate a replying item's OP code. This returned value from the monitor is encoded to ASCII characters. Refer to the operation code table. Ex.) The byte data 1Ah is encoded to ASCII character '1' and 'A' (31h and 41h). 8th-9thbytes) Type: Operation type code 00h: Set parameter Like the Auto Setup function which automatically changes the parameter. This returned value from the monitor is encoded to ASCII characters. Ex.) The byte data 01h is encoded to ASCII character '0' and '1' (30h and 31h). 10th-13thbytes) Max. value: Maximum value which monitor can accept. (16bits) This returned value from the monitor is encoded to ASCII characters. Ex.) '0','1','2' and '3' means 0123h (291) 14th-17thbytes) Current Value: (16bits) This returned value from the monitor is encoded to ASCII characters. Ex.) '0','1','2' and '3' means 0123h (291) (14/47)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

(14/47)
5.2 "Get parameter" reply
The monitor replies with a current value and the status of the requested item (operation code).
1
st
byte) STX: Start of Message
ASCII STX (02h)
2
nd
-3
rd
bytes) Result code.
These bytes indicate a result of the requested commands as follows,
00h: No Error.
01h: Unsupported operation with this monitor or unsupported operation under current
condition.
This result code from the monitor is encoded to ASCII characters.
Result code is always 00h(No Error). Because monitor does not reply any command to the
controller when monitor gets an unsupported command on Exx7.
Ex.) The byte data 00h is encoded to ASCII character '0' and '0' (30h and 30h).
4
th
5
th
bytes) OP code page: Operation code page.
These bytes indicate a replying item's OP code page.
This returned value from the monitor is encoded to ASCII characters.
Ex.) The byte data 02h is encoded to ASCII character '0' and '2' (30h and 32h).
Refer to the operation code table.
6
th
7
th
bytes) OP code: Operation code
These bytes indicate a replying item's OP code.
This returned value from the monitor is encoded to ASCII characters.
Refer to the operation code table.
Ex.) The byte data 1Ah is encoded to ASCII character '1' and 'A' (31h and 41h).
8
th
-9
th
bytes) Type: Operation type code
00h: Set parameter
Like the Auto Setup function which automatically changes the parameter.
This returned value from the monitor is encoded to ASCII characters.
Ex.) The byte data 01h is encoded to ASCII character '0' and '1' (30h and 31h).
10
th
-13
th
bytes) Max. value: Maximum value which monitor can accept. (16bits)
This returned value from the monitor is encoded to ASCII characters.
Ex.) '0','1','2' and '3' means 0123h (291)
14
th
-17
th
bytes) Current Value: (16bits)
This returned value from the monitor is encoded to ASCII characters.
Ex.) '0','1','2' and '3' means 0123h (291)
STX
Result
OP code
page
OP code
Type
Max value
Current Value
ETX
Hi
Lo
Hi
Lo
Hi
Lo
Hi
Lo
MSB
LSB
MSB
LSB
1
st
2
nd
-3
rd
4
th
5
th
6
th
7
th
8
th
-9
th
10
th
-13
th
14
th
-17
th
18
th