NEC E556 Users Manual - Page 34

ARC is an audio link which can [Phase] replace other cables between Eliminate flicker and distortion. the Monitor and the receiver or speaker system. HDMI-1 terminal can support ARC function. [Reset RGB Options] Reset RGB options to factory default settings. [Device List] Show the device list. 10. Monitor ID Set the monitor ID number from 7. Energy Options 1─100, All, or Group A─J. Home mode is intended for home use, and will save much energy. In this mode, the Monitor automatically switches to Auto 11. Time Schedule This function enables your TV to turn on and off automatically. Power save mode and then Auto [Schedule Status] Standby mode when no external Select On to enable Time signal is input. Schedule. Retail mode is a relatively more energy consuming mode. In this mode, the Monitor does not [Current Time] Set the current time before using this function. switch to Auto Power save mode or Auto Standby mode when no external signal is input. [Power On] Set the time for your TV to turn on. Office mode is between Home [Power Off] mode and Retail mode. In this Set the time for your TV to turn mode, the Monitor automatically off. switches to Auto Power save mode but will not continue to switch to Auto Standby mode when no external signal is input. 12. Sleep Timer Select how long the TV will take to automatically turn intself off. Off / 5 / 10 / 15 / 30 / 60 / 90 / 8. Auto Power Down 120 / 180 / 240 (minutes) Select On to enable your TV to turn off automatically when you do not press any buttons in 4 hours. 13. No Signal Menu Select how long the No Signal message will display. Off / 10 seconds / 30 seconds / 9. RGB Options 1 minutes / 5 minutes / 10 (Only available for VGA input, minutes / 15 minutes and when there is VGA signal input) [Auto Adjust] Automatically adjust the image settings such as position. 14. IR Lock Setting Select On to lock your remote control, and the remote control will disable to control the TV. Press Display button for 5 [H. Position] seconds can unlock it. Adjust horizontal position. [V. Position] Adjust vertical position. 15. System Info Indicate the display information. [Clock] Set to the minimum level if noise occurs. 16. Reset AV & Setup Reset all Audio, Video, and Setup settings to factory default settings. English-32