NEC E556 Users Manual - Page 48
Supporting HDMI CEC command, English-46
View all NEC E556 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Supporting HDMI CEC command HDMI CEC command name One Touch Play Remote Control Pass Through Power Status System Information System Standby System Audio Control Device OSD Name Transfer Routing Control Explanation If HDMI CEC supporting devices are turned on, the monitor that connected the devices by HDMI cable is also turned on automatically then changed Input to HDMI. If the monitor is turned on when HDMI CEC devices are turned on, it changed input to HDMI. The monitor's wireless remote control button operation is functioning to HDMI CEC supporting devices. For example, if turn on the monitor by wireless remote control and press play back button, HDMI CEC supporting devices will also be turn on and play back. Connected HDMI CEC supporting devices obtains the monitor's power status such as the monitor is in standby mode or on. This function obtains the information of a connected HDMI CEC supporting device (CEC version, Physical Address). In addition, this function copes with "Change Language function". If the language using at the monitor is changed, the language at connected HDMI CEC supporting device is changed to the same language that selected at the monitor. As for the "Change Language function", it is necessary that the connected HDMI CEC supporting device to cope a multilanguage. If turn off the monitor by wireless remote control supplied with the monitor, HDMI CEC supporting devices are also turned off at the same time. If turn off the monitor while a HDMI CEC supporting device is recording, the device is kept on. Please refer to the user's manual supplied with the HDMI CEC supporting device for more detail. The function sends digital audio signal through HDMI cable. Please set audio amplifier between the monitor and HDMI CEC supporting devices with HDMI cable. The Volume button on the wireless remote control is also controlling volume of the connected audio amplifier. While this function is active, internal speaker or external speaker connected to the monitor will be MUTE. This function obtains the connected HDMI CEC supporting device's name. By selecting device name, HDMI CEC supporting device input can be switched. After selecting the device, wireless remote control operation is functioning to the selected device. CEC is an abbreviation of Consumer Electronics Control. NOTE: • Depending on the connected device, sometimes the device does not work properly. English-46