NEC E705 User's Manual - Page 27

English DISPLAY PROTECTION POWER SAVE Sets how long the monitor waits to go into power save mode after the signal is lost. NOTE: When connecting DVI, the video card might not stop sending the digital data even though the image might have disappeared. If this occurs the monitor will not switch into power management mode. AUTO STANDBY AUTO POWER SAVE The monitor automatically goes into OFF at the preset time period after signal is lost. - The monitor will return to normal mode when signal is restarted. AUTO STANDBY The monitor automatically goes into OFF at the preset time period after signal is lost. - Press the power button to return to normal mode. DISABLE The monitor will not goes into OFF after signal is lost. - HEAT STATUS Displays status of the FAN, BACKLIGHT and TEMPERATURE. - FAN CONTROL Cooling fan reduces the temperature of the display to protect from overheating. If "AUTO" is selected, you can adjust the start temperature of the cooling fan and fan speed. AUTO, HIGH SCREEN SAVER Use the SCREEN SAVER function to reduce the risk of Image Persistence. GAMMA The display gamma is changed and fixed when "ON" is selected. OFF BACKLIGHT The brightness of backlight is decreased when "ON" is selected. NOTE: Do not select this function when ROOM LIGHT SENSING is MODE1 or MODE2. OFF MOTION The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT) at user determined intervals. You can set interval time and zooming ratio. This function is disabled when PIP, STILL, TEXT TICKER are enabled. OFF SIDE BORDER COLOR Adjusts the color of the side borders when a 4:3 image is displayed. 15 Press + button, the bar will become lighter. Press - button, the bar will become darker. CHANGE PASSWORD Allows the security password to be changed. - The factory preset password is 0000. SECURITY Locks the security password. START-UP LOCK: Security password is required when the monitor power is on. CONTROL LOCK: Security password is required when the remote control button or control button on the monitor is pressed. BOTH LOCK: Security password is required when the monitor power is on, or the remote control button or control button on the monitor is pressed. OFF RESET Resets the following settings within the DISPLAY PROTECTION menu back to factory setting: - POWER SAVE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR. EXTERNAL CONTROL IP ADDRESS SETTING NOTE: When changing the LAN SETTING, you need to wait several seconds until the LAN SETTING is applied. IP SETTING Enabling this option automatically assigns an IP address to the monitor from your DHCP server. Disabling this option allows you to register the IP address or subnet mask number obtained from your network administrator. NOTE: Consult your network administrator for the IP address when "AUTO" is selected for [IP SETTING]. AUTO IP ADDRESS: Set your IP address of the network connected to the monitor when "MANUAL" is selected for [IP SETTING]. 192.168.0.10 English-25