NEC E705 User's Manual - Page 33
Controlling the LCD monitor via RS-232C Remote Control
View all NEC E705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF. • Switching between input signals. • Sound Mute ON or OFF. Connection LCD Monitor + PC LCD Monitor PC RS-232C RS-232C Cable NOTE: If your PC is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact your dealer for details. For the pin assignment, please see page 47 "2) RS-232C input". To control a monitor, please use the control command. Instructions for the control command can be found on the CD included with the display. The file is called "External_control.pdf". 1) Interface PROTOCOL BAUD RATE DATA LENGTH PARITY BIT STOP BIT FLOW CONTROL RS-232C 9600 [bps] 8 [bits] NONE 1 [bit] NONE This LCD monitor uses RXD, TXD and GND lines for RS-232C control. The reverse type cable (null modem cable) (not include) should be used for RS-232C control. English-31