NEC GT5000 GT5000/GT6000/GT6000R UM - Page 49
Making the Most out of the Viewer Function, Using the Viewer
View all NEC GT5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5. Using the Viewer NOTE: • To use the Viewer, first you need to create presentation materials on your PC using the Dynamic Image Utility 2.0 contained on the supplied NEC Projector User Supportware CD-ROM. For installation, see "6- b Software Installation". For creating presentation materials, see the Slide show function on the on-line manual of the Dynamic Image Utility 2.0. • Selecting Viewer sets the audio input for DVI input. z Making the Most out of the Viewer Function Features You can view presentation data, capture (GT5000 only), and play images on the projector. A PC card is used to view presentation data prepared on the computer and to capture and play images projected with the projector. The Viewer feature allows you to view slides stored on a PC memory card (referred to as PC card in this manual) on the projector. Even if no computer is available, presentations can be conducted simply with the projector. This feature is convenient for holding presentations at meetings and in offices, as well as for playing images taken on digital cameras. Easy to use • Presentations can be started immediately simply by inserting a PC card (not supplied) • Easy slide switching • Remote control operation • Jumping to list of slides or any specific slide High quality images • High resolution up to 1024 x 768 dots • 24-bit full color playback • Viewing of digital camera images Simple utility software (for computer) • Dynamic Image Utility 2.0 operable on Windows 98/Me/XP/2000 • Slides can be created by capturing the currently displayed image (GT5000 only) • Control screen for displaying lists of slides and editing * Microsoft, Windows and PowerPoint are registered trademarks of Microsoft Corporation. Inserting and Removing a PC Card NOTE: • Do not try to force the PC card into the slot. 2 PC CARD 1 NOTE: When using two PC cards, do not insert both PC cards into the two PC card slots simultaneously. Doing so may cause projector malfunction such as shutting down. Each PC card must be inserted slowly one at a time. Inserting the PC Card • Hold the PC card horizontally and insert it slowly into PC card slot 1 or 2 with its top facing up. PC card (not supplied) USB(MOUSE/HUB) USB (PC) 2 PC CARD PC CONTROL 1 IN LAN OUT SC TRIGGER REMOTE 1 REMOTE 2 IN OUT AC IN Removing the PC Card Press the eject button slowly. The eject button card pops out a little. Press the eject button slowly again. Grasp the edges of the PC card and pull it out. Push and insert the eject button fully until it stops. USB(MOUSE/HUB) USB (PC) 2 PC CARD PC CONTROL 1 IN LAN OUT SC TRIGGER REMOTE 1 REMOTE 2 IN O Eject button NOTE: Do not eject the PC card while its data is being accessed. CAUTION: Make sure that the PC card or LAN card is removed during Standby mode (NOT Idle mode)or with the main power off.Failure to do so may cause damage to the data on your PC card or LAN card,or may cause the projector to malfunction.Should a malfunction occur, turn off the main power and turn it back on. Direction for Inserting the PC Card The PC card has a top and bottom and must be inserted into the PC card slot in a specific direction. It cannot be inserted backwards or upside-down. Attempting to force it into the slot in the wrong direction may break the internal pin and damage the card slot. Refer to the PC card's operating instructions for the proper direction of insertion. PC Card Type The PC Card slot accepts PCMCIA Type II only. NOTE: The projector does not support FAT32 or NTFS formatted flash memory card or USB memory device. Be sure to use a flash memory card or USB memory device formatted with the FAT16 or FAT file system. To format your flash memory card or USB memory device in your computer, refer to the document or help file that comes with your Windows. 5-2