NEC ITL-2E-1 User Guide - Page 41
Manual Intercom, To initiate, To answer, Dial By Name Using System Speed Dialing, Speaker, Line/Trunk
UPC - 722580119483
View all NEC ITL-2E-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Manual Intercom To initiate Lift handset or press Speaker, press MICM, ringback tone is heard. Called party ICM 2000 4:26 PM TUE 12 FEB 2008 Each press of MICM key sends tone bursts. To answer MICM key flashes, indicating an incoming call. Ring tone may also be heard. Calling party ICM 2001 4:26 PM TUE 12 FEB 2008 Press MICM. Lift handset or press Speaker, LED lights solid green. If called station is engaged in a non-intercom call, the station may press MICM after placing original caller on hold (with Hold key). Dial Intercom To initiate Lift handset or press the Speaker key. Press DICM key. Dial desired intercom station number (0-9). Tone burst is sent. (Press 1 to change to ring tone signal. To answer DICM LED flashes, indicating an incoming intercom call. Tone burst or ring tone is heard. Press DICM. Lift handset or press Speaker. LCD shows solid green. Dial By Name Using System Speed Dialing To initiate Press the SYS soft key. Enter up to the first four characters of a name using the keypad. Press the UP or DOWN key to start the search. The name and the number are shown on the LCD. If more than one name matches the letters entered, scroll through the matches with the UP or DOWN soft key. If no matches are found, the first System Speed Dial buffer will be displayed. Press the Speaker key, or select a Line/Trunk key to dial the selected number 33