NEC LCD175VXM-BK MultiSync LCD175VX+_195VX+_175VXM - Page 16
Monitor, Specifications, MultiSync, LCD175VXM, Notes
UPC - 805736014655
View all NEC LCD175VXM-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Specifications Monitor Specifications MultiSync® LCD175VXM+ Notes LCD Module Diagonal : Viewable Image Size : Native Resolution (Pixel Count) : 17.0 inch 17.0 inch 1280 x 1024 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.264 mm dot pitch; 270cd/m2 white luminence; 700:1 contrast ratio, typical Input Signal Video : Sync : ANALOG 0.7 Vp-p/75 Ohms Separate sync. TTL Level (Positive/Negative) Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Digital Input: DVI Display Colors 16,7M Depending on display card used. Maximum Viewing Angles Left/Right : 80°/80° (CR>10) Up/Down : 75°/85° (CR>10) Synchronization Range Horizontal : 31.5 kHz to 81.1 kHz Vertical : 56.0 Hz to 76.0 Hz Automatically Automatically Resolutions Supported 720 x 400*1:VGA text Some systems may not support all 640 x 480*1 @ 60 Hz to 75 Hz modes listed. 800 x 600*1 @ 56 Hz to 75 Hz 832 x 624*1 @ 75 Hz 1024 x 768*1 @ 60 Hz to 75 Hz 1152 x 864*1 @ 70 Hz to 75 Hz NEC DISPLAY SOLUTIONS 1152 x 870*1 @ 75 Hz cites recommended resolution 1280 x 960*1 @ 60 Hz to 75 Hz at 60 Hz for optimal display 1280 x 1024 at 60 Hz to 75 Hz performance. Active Display Area Horizontal : 338.0 mm/13.3 inches Vertical : 270.3 mm/10.6 inches Power Supply 100 - 240 V~ 50/60 Hz Speaker Practical Audio Output 1+1 watts Current Rating 0.6 - 0.4 A/100-240V Dimensions 368.0 mm (W) x 379.0 mm (H) x 205.0 mm (D) 14.5 inches (W) x 14.9 inches (H) x 8.1 inches (D Weight 4.8 kg 10.6 lbs Environmental Considerations Operating Temperature : Humidity : Altitude : Storage Temperature : Humidity : Altitude : 5°C to 35°C/41°F to 95°F 10% to 80% 0 to 10,000 Feet -10°C to 60°C/14°F to 140°F 10% to 85% 0 to 40,000 Feet *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done. NOTE: Technical specifications are subject to change without notice. 14