NEC LCD2010X-T MultiSync LCD2010X User's Manual - Page 11
Controls cont. - i
UPC - 805736001389
View all NEC LCD2010X-T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Controls cont. AUTO ADJUST Automatically sets the Horizontal and Vertical Image Position within the display area of the LCD. Image Adjust Controls (Analog Input Only) H.SIZE Adjusts the horizontal size by increasing or decreasing this setting. FINE Improves focus, clarity and image stability by increasing or decreasing this setting. AUTO ADJUST Automatically adjusts H. SIZE and FINE settings. AccuColor® Control Systems Five color presets select the desired color setting. Each color setting is adjusted at the factory. R,G,B: Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the color bars. Tools 1 SMOOTHING: Select one of three image sharpness settings. This function is only valid when the expanded display function (expansion function)is on. TEXT MODE: Use this to display text clearly. NORMAL: This sharpness is between TEXT and GRAPHIC MODE. GRAPHIC MODE: This mode is suited for images and photographs. EXPANSION MODE: Sets the zoom method. FULL SCREEN: The image is expanded to 1280 x 1024, regardless of the resolution. KEEP ASPECT: The image is expanded without changing the aspect ratio. EXPANSION OFF: The image is not expanded. CUSTOM (DIGITAL INPUT ONLY): Select one of four expansion rates. In this mode the resolution may be low and there may be blank areas. This mode is for use with special video cards. VIDEO DETECT: Selects the method of video detection when more than one computer is connected. NONE: The Monitor will not search the other video input port unless the monitor is turned on. FIRST DETECT: The video input has to be switched to "FIRST DETECT" mode. When current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically. The monitor will not look for other video signals while the current video source is present. 9 2010X.wpc 11 7/13/00, 5:01 PM