NEC LCD225WNXM-BK LCD205-225WNXM-WNX user manual - Page 14

Specifications - LCD225WNXM - multisync 22 monitor

Page 14 highlights

Specifications - LCD225WNXM English Monitor Specifications MultiSync LCD225WNXM Monitor Notes LCD Module Diagonal: 55.9 cm/22.0 inches Native Resolution (Pixel Count): 1680 x 1050 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.282 mm dot pitch; 300 cd/m2 (Typ) white luminance, 1000:1 (Typ) contrast ratio, typical; response time: 5 ms (Typ). Input Signal PC INPUT: Video: Sync: AUDIO INPUT: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI-D Separate sync.TTL Level (Positive/Negative) Horizontal sync. Positive/Negative Vertical sync. Positive/Negative STEREO Mini Jack 500mV rms Input Impedance 20 Kohm Head Phone Output STEREO Mini Jack Headphone Impedance 32 Ohm Display Colors Analog input: 16,777,216 Depends on display card used. Synchronization Range Horizontal: 31.5 kHz to 81.1 kHz Vertical: 56 Hz to 75 Hz Automatically Automatically Viewing Angle Left/Right: -80°/+80° (CR>10), -88°/+88° (CR>5) Up/Down: -80°/+80° (CR>10), -88°/+88° (CR>5) Resolutions Supported 720 x 400*1 @ 70 Hz Some systems may not 640 x 480*1 @ 60 Hz to 75 support all modes listed. 800 x 600*1 @ 56 Hz to 75 Hz 832 x 624*1 @ 75 Hz 1024 x 768*1 @ 60 Hz to 75Hz 1280 x 768*1 @ 60 Hz 1152 x 864*1 @ 75 Hz 1152 x 870*1 @ 75 Hz 1280 x 960*1 @ 60 Hz to 75Hz 1280 x 1024*1 @ 60 Hz to 75Hz 1360 x 768*1 @ 60 Hz 1400 x 1050*1 @ 60 Hz to 75Hz 1440 x 900*1 @ 60 Hz to 75 Hz Recommended resolution is 60 Hz for 1680 x 1050 @ 60 Hz optimal display performance. Active Display Area Horizontal: 473.8 mm/18.7 inches Vertical: 296.1 mm/11.7 inches Speakers Practical Audio Output: 1.0 W + 1.0 W USB Hub I/P: Port: Load Current: USB Specification Revision 2.0 Upstream 1 Downstream 4 Maximum 0.5 A per port Power Supply 100 - 240 V ~ 50/60 Hz Power Consumption 60 W Dimensions 505.7 mm (W) x 391.3 - 501.3 mm (H) x 245.0 mm (D) (with stand) 19.9 inches (W) x 15.4 - 19.7 inches (H) x 9.6 inches (D) 505.7 mm (W) x 344.1 mm (H) x 76.7 mm (D) (without stand) 19.9 inches (W) x 13.5 inches (H) x 3.0 inches (D) Weight with stand: 9.3 kg/20.5 lbs. without stand: 6.3 kg/13.9 lbs. Environmental Considerations Operating Temperature: Humidity: Altitude: Storage Temperature: Humidity: Altitude: 5°C to 35°C/41°F to 95°F 30% to 80% 0 to 3,048 m/0 to 10,000 Feet -10°C to +60°C/14°F to 140°F 10% to 85% 0 to 12,192 m/0 to 40,000 Feet *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done. NOTE: Technical specifications are subject to change without notice. English-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

English
English-13
Specifications - LCD225WNXM
Monitor Specifications
MultiSync LCD225WNXM Monitor
Notes
LCD Module
Diagonal:
55.9 cm/22.0 inches
Active matrix; thin film transistor (TFT)
Native Resolution (Pixel Count):
1680 x 1050
liquid crystal display (LCD); 0.282 mm dot
pitch; 300 cd/m
2
(Typ) white luminance,
1000:1 (Typ) contrast ratio, typical;
response time: 5 ms (Typ).
Input Signal
PC INPUT: Video:
ANALOG 0.7 Vp-p/75 Ohms
Digital Input: DVI-D
Sync:
Separate sync.TTL Level (Positive/Negative)
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
AUDIO INPUT:
STEREO Mini Jack
500mV rms Input Impedance 20 Kohm
Head Phone Output
STEREO Mini Jack
Headphone Impedance 32 Ohm
Display Colors
Analog input:
16,777,216
Depends on display card used.
Synchronization Range
Horizontal:
31.5 kHz to 81.1 kHz
Automatically
Vertical:
56 Hz to 75 Hz
Automatically
Viewing Angle
Left/Right:
-80°/+80° (CR>10), -88°/+88° (CR>5)
Up/Down:
-80°/+80° (CR>10), -88°/+88° (CR>5)
Resolutions Supported
720 x 400*
1
@ 70 Hz
Some systems may not
640 x 480*
1
@ 60 Hz to 75
support all modes listed.
800 x 600*
1
@ 56 Hz to 75 Hz
832 x 624*
1
@ 75 Hz
1024 x 768*
1
@ 60 Hz to 75Hz
1280 x 768*
1
@ 60 Hz
1152 x 864*
1
@ 75 Hz
1152 x 870*
1
@ 75 Hz
1280 x 960*
1
@ 60 Hz to 75Hz
1280 x 1024*
1
@ 60 Hz to 75Hz
1360 x 768*
1
@ 60 Hz
1400 x 1050*
1
@ 60 Hz to 75Hz
1440 x 900*
1
@ 60 Hz to 75 Hz
Recommended resolution is 60 Hz for
1680 x 1050 @ 60 Hz
.................................
optimal display performance.
Active Display Area
Horizontal:
473.8 mm/18.7 inches
Vertical:
296.1 mm/11.7 inches
Speakers
Practical Audio Output:
1.0 W + 1.0 W
USB Hub
I/P:
USB Specification Revision 2.0
Port:
Upstream 1
Downstream 4
Load Current:
Maximum 0.5 A per port
Power Supply
100 - 240 V ~ 50/60 Hz
Power Consumption
60 W
Dimensions
505.7 mm (W) x 391.3 - 501.3 mm (H) x 245.0 mm (D) (with stand)
19.9 inches (W) x 15.4 - 19.7 inches (H) x 9.6 inches (D)
505.7 mm (W) x 344.1 mm (H) x 76.7 mm (D) (without stand)
19.9 inches (W) x 13.5 inches (H) x 3.0 inches (D)
Weight
with stand:
9.3 kg/20.5 lbs.
without stand:
6.3 kg/13.9 lbs.
Environmental Considerations
Operating Temperature:
5°C to 35°C/41°F to 95°F
Humidity:
30% to 80%
Altitude:
0 to 3,048 m/0 to 10,000 Feet
Storage Temperature:
-10°C to +60°C/14°F to 140°F
Humidity:
10% to 85%
Altitude:
0 to 12,192 m/0 to 40,000 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE:
Technical specifications are subject to change without notice.