NEC LCD225WNXM-BK LCD205-225WNXM-WNX user manual - Page 6

Screen Rotation, Tilt and Swivel, Raise and Lower Monitor Screen, D.1

Page 6 highlights

English 9. Hold all the cables firmly and place the cable cover onto the stand (Figure D.1). To remove the cable cover, lift the cover off as shown in Figure D.2. NOTE: Handle with care when placing the cable cover and avoid pinching your fingers. 10. Connect the power cord to the power outlet (Figure D.3). NOTE: If you have difficulty removing the cable cover, please push the lower opening upward to remove it, as show in Figure E.1. NOTE: Please refer to the Caution section of this manual for proper selection of power cord. 11. Turn on the monitor with the front power button and the computer (Figure D.3). Figure E.1 Power Cord Figure D.1 Figure D.2 Figure D.3 12. No-touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings (Analog input only). For further adjustments, use the following OSD controls: • Auto Contrast • Auto Adjust Refer to the Controls section of this User's Manual for a full description of these OSD controls. NOTE: If you have any problem, please refer to the Troubleshooting section of this User's Manual. Raise and Lower Monitor Screen The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen. Figure RL.1 Tilt and Swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). NOTE: Handle with care when tilting and swivelling the monitor screen. Screen Rotation Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching with your fingers. To raise the screen, place hands on each side of the monitor and lift up to the highest position (Figure RL.1). To rotate screen, place hands on each side of the monitor screen and turn clockwise from Landscape to Portrait or counterclockwise from Portrait to Landscape (Figure R.1). Figure TS.1 Figure R.1 English-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

English
English-5
9.
Hold all the cables firmly and place the cable cover onto the stand (
Figure D.1
). To remove the cable cover, lift the cover
off as shown in
Figure D.2
.
NOTE:
Handle with care when placing the cable cover and avoid pinching your fingers.
10. Connect the power cord to the power outlet (
Figure D.3
).
NOTE:
If you have difficulty removing the cable cover, please push the lower opening upward to remove it,
as show in
Figure E.1
.
NOTE:
Please refer to the Caution section of this manual for proper selection of power cord.
11. Turn on the monitor with the front power button and the computer (
Figure D.3
).
12. No-touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings (Analog input
only). For further adjustments, use the following OSD controls:
Auto Contrast
Auto Adjust
Refer to the
Controls
section of this User’s Manual for a full description of these OSD controls.
NOTE:
If you have any problem, please refer to the
Troubleshooting
section of this User’s Manual.
Figure D.1
Figure D.2
Figure D.3
Power Cord
Figure E.1
Screen Rotation
Before rotating, the screen must be raised to the highest level to
avoid knocking the screen on the desk or pinching with your
fingers.
To raise the screen, place hands on each side of the monitor and
lift up to the highest position (
Figure RL.1
).
To rotate screen, place hands on each side of the monitor screen
and turn clockwise from Landscape to Portrait or counter-
clockwise from Portrait to Landscape (
Figure R.1
).
Tilt and Swivel
Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired
(
Figure TS.1
).
NOTE:
Handle with care when tilting and swivelling the monitor screen.
Figure RL.1
Figure TS.1
Raise and Lower Monitor Screen
The monitor may be raised or lowered. To raise or lower
screen, place hands on each side of the monitor and lift or
lower to the desired height (
Figure RL.1
).
NOTE:
Handle with care when raising or lowering the
monitor screen.
Figure R.1