Home » NEC Manuals » Computer Monitors » NEC LED-FA019i2 » Manual Viewer

NEC LED-FA019i2 User Manual - Page 14

Supplier's Declaration of Conformity for US

Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

2.5 Declaration of Conformity  CE  FCC  RoHS  AEEE Yönetmeliğine Uygundur CE Information  Electromagnetic Compatibility Directive (EMC) 2014/30/EU  Low Voltage Directive 2014/35/EU  ETL WARNING! This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. FCC Information (for USA only) WARNING!  The Federal Communications Commission does not allow any modification or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment.  This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Supplier's Declaration of Conformity (for USA only) This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: NEC Display Solutions of America, Inc. Address: 3250 Lacey Rd, Ste 500 Downers Grove, IL 60515 Telephone Number: 630-467-3000 Type of Product LED MODULE Equipment Classification: Class A Peripheral Model Number: LED-FA012i2 LED-FA025i2 LED-FA009i2 LED-FA015i2 LED-FA031i2 LED-FA019i2 LED-FA038i2 If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet, prepared by the Federal Communications Commission, helpful: "How to Identify and Resolve Radio-TV Interference Problems." This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-0034. 14

Section	Page
1 About this User Guide	9
1.1 Safety Symbols Used in this Manual	9
1.2 Service & Support in Europe	9
2 Safety and Compliance Guidelines	10
2.1 Qualification of Personnel	10
2.2 Personal Protection	10
2.3 General Safety Guidelines	11
2.3.1 Ambient Temperature	12
2.3.2 Risk of Fire	12
2.4 Safety for Electricity and Power Supply	12
2.5 Declaration of Conformity	14
3 About this Product	15
3.1 Scope of Delivery	15
3.2 List of Parts	15
3.3 Framesets for Bundles	17
3.3.1 Frameset for LED-FA012i2-110 and LED-FA019i2-110 (4×4 Modules)	17
3.3.2 Frameset for LED-FA015i2-137 (5×5 Modules)	18
3.3.3 Frameset for LED-FA019i2-165 (6×6 Modules)	18
3.3.4 Frameset for LED-FA012i2-220 and LED-FA025i2-220, LED-FA038i2-220 (8×8 Modules)	19
3.4 Specification	20
3.5 LED Wall Components	23
3.5.1 Module	23
3.5.2 Cabinet	24
3.5.2.1 Corner Alignment Pins	25
3.5.2.2 Cabinet Interlocks	25
3.5.2.3 Grip Handles	26
3.5.2.4 Cabinet Hanger Pins	27
3.5.2.5 Network and Power Supply Socket	28
3.5.3 Pixel Card	29
3.5.4 Hub Board	31
3.5.5 Power Supply	32
3.5.6 Signal Lights	33
3.5.7 Power Bar	34
3.6 Ventilation Requirements	35
3.6.1 Heat Dissipation	36
3.6.2 Cooling	36
4 Accessories	37
4.1 Power Supply and Connecting Cables	37
4.1.1 Power Supply for Power Bar	37
4.1.2 Signal Cable	37
4.2 Adjustment plate	37
5 Prepare for Use	38
1.1	38
1.1	38
1.1	38
5.1 Cabinet Packaging	38
5.2 Pixel Cards Packaging	39
1.1	39
1.1	39
5.3 Installation Setup – Wall Mounting	40
6 Assemble Components	41
6.1 Install Mounting bars for Wall Mounting	41
6.1.1 Prepare the Wall Surface	41
6.1.2 Draw and Mark the Anchor Positions on Wall	42
6.1.3 Drill the Positions	43
6.1.4 Attach the Mounting bars	44
6.2 Install Power Bar onto Mounting bars	45
6.2.1 Check the Evenness	45
6.2.2 Bring Power Bar into Position	45
6.2.3 Attach Power Bar to Mounting bars	45
6.3 Install Cabinets	46
6.3.1 Install Cabinet Hanger Pins on the Backside	46
6.3.2 Install Cabinets for Bottom-Row on Power Bar	47
6.3.3 Secure Cabinet to Power Bar	48
6.3.4 Install Further Cabinet Rows	49
6.3.5 Align Cabinets	49
6.4 Connect Power and Data Cables to Power Bar	50
6.4.1 Connect Data Cables to the Power Bar	50
6.4.2 Connect Power Cables to the Power Bar	51
6.4.3 Check the Power Supply and Data Connection of the Modules	51
6.5 Install Overframes and Power bar cover	52
6.6 Install Pixel Cards	54
7 Getting Started	56
7.1 Info on the Connection Setup	56
7.2 Install Controller Software NovaLCT	56
7.3 Configure the Screen in NovaLCT (Loading scr-Files)	57
7.4 Update the Calibration Data after Installing All Pixel Cards	62
7.5 Creating calibration data for backup	66
8 Software NovaLCT	71
8.1 Function Overview	71
8.2 Advanced User Login	74
8.3 Monitoring	75
8.3.1 Function Overview	75
8.3.2 Start Monitoring Function	75
8.3.3 Change Monitoring Parameters	76
8.3.4 Receiving Card and Power supplies	79
8.3.5 Sending Card	80
8.3.6 Temperature	81
9 Cleaning	83
10 Maintenance	84
10.1 Routine Maintenance	84
10.2 Regular Cleaning	84
10.3 Power System Maintenance	85
10.4 Maintenance Tools	85
10.5 Front Service	86
10.5.1 Change the Pixel Cards	86
10.5.2 Remove the Hub Board	87
10.5.3 Change the Receiving Cards	88
10.5.4 Change the Power Supply System	88
11 Spare Parts	90
12 Troubleshooting	92
13 Disposal	93
13.1 Within the European Union	93
13.2 Outside the European Union	93
14 Copyright and Disclaimer	94
14.1 Copyright	94
14.2 Disclaimer	94
15 Appendix	95
15.1 Cable Plans	95
15.1.1 LED-FA012i2-110, LED-FA019i2-110: Data Connections	95
15.1.2 LED-FA012i2-110, LED-FA019i2-110: Power Connections	95
15.1.3 LED-FA015i2-137: Data Connections	96
15.1.4 LED-FA015i2-137: Power Connections	96
15.1.5 LED-FA019i2-165: Data Connections	97
15.1.6 LED-FA019i2-165: Power Connections	97
15.1.7 LED-FA025i2-220, LED-FA038i2-220: Data Connections	98
15.1.8 LED-FA025i2-220, LED-FA038i2-220: Power Connections	98
15.1.9 LED-FA012i2-220: Data Connections	99
15.1.10 LED-FA012i2-220: Power Connections	99
15.2 Backside hole cabinet	100

Match case Limit results 1 per page

2.5

Declaration of Conformity



FCC



RoHS



EEE Yönetmeliğine Uygundur



Electromagnetic Compatibility

Directive (EMC) 2014/30/EU



Low Voltage Directive 2014/35/EU



ETL

CE Information

WARNING!

This equipment is compliant with Class A of CISPR 32.

In a residential environment this equipment may cause radio interference.

FCC Information (for USA only)

WARNING!



The Federal Communications Commission does not allow any modification or changes to the

unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure

to comply with this government regulation could void your right to operate this equipment.



This equipment has been tested and found to comply with the limits for a class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

Supplier’s Declaration of Conformity (for US

A only)

This device complies with Part 15 of FCC Rules. Operation is subject to the following two

conditions.

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

U.S. Responsible Party:

NEC Display Solutions of America, Inc.

Address:

3250 Lacey Rd, Ste 500

Downers Grove, IL 60515

Telephone Number:

630-467-3000

Type of Product

LED MODULE

Equipment Classification: Class A Peripheral

Model Number:

LED-FA012i2

LED-FA015i2

LED-FA019i2

LED-FA025i2

LED-FA031i2

LED-FA038i2

LED-FA009i2

If necessary, the user should contact the dealer or an experienced radio/television technician for

additional suggestions. The user may find the following booklet, prepared by the Federal

Communications Commission, helpful: "How to Identify and Resolve Radio-TV Interference

Problems." This booklet is available from the U.S. Government Printing Office, Washington, D.C.,

20402, Stock No. 004-000-0034.