NEC LT157 User Manual - Page 15

Remote Control Features NOTE: If you are using a Macintosh computer, you can click either the rightclick or left-click button to activate the mouse. LIST SLIDE FOLDER PIC-MUTEFREEZE KEYSTONE VOL. HMEALGPNIFFYOPCOIUNSSTLEIRDEZPOCOCMARD SHIFT PJ SELECT LASER RGB2 AUTO ADJ. S-VIDEO POWER RGB1 ON VIDEO OFF 3 1 2 1. Infrared Transmitter Direct the remote control toward the remote sensor on the projector cabinet. 2. Laser Pointer Beams a laser light when "Laser" button is pressed. 3. Remote Jack Not available on this model. 64 5 8 7 11 13 OFF POWER VIDEO S-VIDEO RGB1 ON RGB2 AUTO ADJ. MENU LASER 9 10 12 14 SELECT 15 ENTER CANCE L 16 PJ 4. LED Flashes when any button is pressed. 5. Power ON Button If the main power is applied, you can use this button to turn your projector on. 6. Power OFF Button If the main power is applied, you can use this button to turn your projector off. NOTE: To turn off the projector, press and hold the POWER OFF button for a minimum of two seconds. 7. VIDEO Button Press this button to select an NTSC, PAL, SECAM or NTSC4.43 compatible video source from a VCR, DVD player, laser disc player or document camera. 8. S-VIDEO Button Press this button to select an S-Video source from a VCR. 9. RGB 1 Button Press this button to select a video source from a computer or component equipment connected to your RGB port (DVI digital on LT158). 10. RGB 2 Button Not available on the LT157. For LT158: Press this button to select a DVI analog signal from a computer. 11. AUTO ADJ Button Use this button to adjust an RGB source for an optimal picture. Some signals may not be displayed correctly or take time to switch between sources. 12. LASER Button Press and hold this button to activate the laser pointer. When lit, you can use the laser to draw your audience's attention to a red dot that you can place on any object. 13. MENU Button Displays the menu for various settings and adjustments. 14. SELECT (LMᮤ ᮣ) (Mouse) Button When you are in the Computer mode, these buttons work as a computer mouse. When you are in the Projector mode, which is indicated by lighting the PJ button: LM: Use these buttons to select the menu of the item you wish to adjust. ᮤ ᮣ: Use these buttons to change the level of a selected menu item. A press of the ᮣ button executes the selection. When the pointer is displayed, these LMᮤ ᮣ buttons move the pointer. 15. ENTER (Left Click) Button When you are in the Computer mode, this button works as the mouse left button. When this button is pressed and held for a minimum of 1.5 seconds, the drag mode is set. When you are in the Projector mode, which is indicated by lighting the PJ button: Use this button to enter your menu selection. It works the same way as the "Enter" button on the cabinet. 16. CANCEL (Right Click) Button When you are in the Computer mode, this button works as the mouse right button. When you are in the Projector mode, which is indicated by lighting the PJ button: Press this button to exit "Menus". It works the same way as the "Cancel" button on the cabinet. E - 11