NEC LT157 User Manual - Page 34

2. Use the L or M button to highlight your selection and press the Enter button to place a check mark next to an option. This action enables that feature. Press the Enter button again to clear the check box. An item "To Advanced Menu" will be added to the bottom of the Basic/ Custom Menu. Selecting this item and pressing the "Enter" button will display the "Advanced Menu" features. If you select an item with a solid triangle ᮣ and press the Enter button on the remote control or the projector cabinet, you can enable all the items within that submenu. Also you can turn on an item within the submenu without placing a check mark on the main menu item. NOTE: Up to 12 main menu items (within Basic/Custom Menu Edit, not including submenu items) can be selected. 3. In order for the changes to take effect, use the ᮤ or ᮣ button on the remote control or the projector cabinet to highlight "OK", then press the Enter button. To cancel the changes, use the L or M buttons to highlight "Cancel" and press the "Enter" button. To return to the factory default, select "Reset" then press the "Enter" button. The default Basic/Custom Menu items are: Source Select (RGB [DVI (DIGITAL) / DVI (ANALOG) on LT158], Video, S-Video and PC Card Viewer), Picture, Volume, Image Options (Keystone), Projector Options (Menu and Setup), Tools (Capture, PC Card Files and ChalkBoard) and Help (Contents and Information) NOTE: Once you have selected OK on the Basic/Custom Menu Edit screen, you cannot cancel the changes on the Menu screen. However, you can re-edit the menu items over again as described in the steps above. NOTE: If the "Advanced Menu" item has been selected on the Menu mode, you get the "Confirmation Change Menu" upon completion of "Basic/Custom Menu" editing. In this case, selecting "Yes" then "Enter" will close all the menus and apply the changes from the Advanced menu to the Basic/Custom Menu. If you select "No" then "Enter" functions, then all menu items will return to the Advanced menu, but your changes will still be available within the "Basic/Custom Menu" selection. To display the previously tailored Basic/Custom Menu, select "Basic/Custom Menu" from the "Menu Mode". Using a USB Mouse Using a USB mouse gives you a smooth operation. A commercially available USB mouse is required. NOTE: There may be some brands of USB mouse that the projector does not support. Operate the Menus using the USB mouse: Mouse Cursor: When connecting a USB mouse to the projector, you get a mouse cursor on the screen. Unless you use your USB mouse within 10 seconds, the mouse cursor disappears. Menu Display: Clicking with a mouse button displays the main menu. Clicking displays the pull-down menu. To close the menu, click anywhere in the background. Adjusting and Setting Display: You can select a menu item and click with a mouse button to make adjustments and setting. Examples: Click (or press and hold) the mouse button ᮤ or ᮣ to adjust the brightness. Or click and drag the mouse button on the slide bar horizontally to adjust it. To save the adjustments, click . The display is closed. If you click anywhere in the background while displaying adjustment and setting menu or dialog box, you will get the main menu at the clicking point. E - 30