NEC NP-M311W Users Manual - Page 73
Using the Viewer, Removing the USB memory from the projector, Press the MENU button again.
View all NEC NP-M311W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Removing the USB memory from the projector 1. Select the VIEWER start screen. Press the EXIT button with no menu displayed. 4. Using the Viewer WIRELESS 2. Remove the USB memory from the projector. Make sure that the LED on the USB memory is not flashing before removing the USB memory. NOTE: If you remove the USB memory from the projector with a slide displayed, the projector may not operate correctly. If this happens, WIRELESS turn off the projector and unplug the power cord. Wait 3 minutes, then connect the power cord, and turn on the projector. Exiting the Viewer 1. Press the MENU button with the slide screen or the thumbnail screen displayed. The control bar or the pop-up menu will be displayed. 2. Press the MENU button again. The on-screen menu will be displayed. 3. Select a source other than [VIEWER] and press the ENTER button. The Viewer will be exited. TIP: To exit the Viewer using the remote control, select a source other than [VIEWER]. 63