NEC NP-PX803UL-BK Users Manual - Page 75
(11) Storing Changes for Lens Shift, Zoom, and Focus [LENS MEMORY]
View all NEC NP-PX803UL-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
3. Convenient Features ⓫ Storing Changes for Lens Shift, Zoom, and Focus [LENS MEMORY] The adjusted values can be stored in projector memory when using the LENS SHIFT, ZOOM and FOCUS buttons of the projector. Adjusted values can be applied to the signal you selected. This will eliminate the need to adjust lens shift, focus, and zoom at the time of source selection. There are two ways to save adjusted values for lens shift, zoom, and focus. Function name Description page REF. LENS MEMORY Adjusted values common to all input signals. At the time of installation, two kinds of adjusted values can be recorded. If no adjusted values are stored in [LENS MEMORY], adjusted values from the selected profile ([REF. LENS MEMORY]) will be applied for lens adjustment. → page 118 LENS MEMORY Adjusted values for each input signal. Use the adjusted values for the signal with a different aspect ratio or resolution. The adjusted values can be applied at the time of source selection. → page 101 NOTE: • For using the lens unit NP16FL, NP17ZL, NP18ZL, NP19ZL, NP20ZL, NP21ZL, and NP31ZL, be sure to carry out [LENS CALIBRA- TION] after replacing the lens unit. (→ page 18, 118) • For the lens unit, NP16FL, the storable value as [LENS MEMORY] feature is for [FOCUS] only. • The [LENS MEMORY] feature is not available for the lens unit, NP39ML. 58