NEC NP4100W-09ZL NP4100 : user's manual - Page 115
Control ID, Filter Message, Assigning or Changing the Control ID
UPC - 805736031409
View all NEC NP4100W-09ZL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
5. Using On-Screen Display Control ID Control ID selection allows units placed in close proximity to one another to have different IR transmissions so only one unit is controlled at a time. Assigning or Changing the Control ID: (Available only when the optional remote control NP02RC is used) 1. Display the current control ID on the Control ID screen. 2. Press one of numeric keypad buttons while pressing and holding the ID SET button on the remote control (NP02RC). No ID means that all the projectors can be operated together with a single remote control. To set "No ID", enter "000" or press the CLEAR button. Note: TIP: The range of IDs is from 1 to 254. 3. Release the ID SET button. Note: The IDs can be cleared in a few days after the batteries are run down or removed. Filter Message Select the time preference between displaying the message for cleaning the filters. Clean the filter when you get the message "Please clean filter." (see page 108) Five options are available: Off, 100[H], 200[H], 500[H], 1000[H]. The default setting is 500[H]. Change the interval time depending on the degree of dust and dirt on the filters. 100