NEC NP4100W-09ZL NP4100 : user's manual - Page 9
Remote Control Precautions, Lamp Replacement, Important Lamp Characteristic
UPC - 805736031409
View all NEC NP4100W-09ZL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Important Information Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • Do not heat, take apart, or throw batteries into fire. • If you will not be using the remote control for a long time, remove the batteries. • Ensure that you have the batteries' polarity (+/-) aligned correctly. • Do not use new and old batteries together, or use different types of batteries together. • Dispose of used batteries according to your local regulations. Lamp Replacement To replace either of the lamps, follow all instructions provided on page 112. Be sure to replace the lamp when the following is displayed on the screen: If you continue to use the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer for lamp replacement. Important Lamp Characteristic The projector has a high-pressure mercury lamp as a light source. A characteristic of mercury lamps is that brightness gradually decreases with age. Also repeatedly turning the lamp on and off will increase the possibility of reduced brightness. CAUTION: When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass fragments could fall if the lamp has been burned out. CAUTION: In rare cases the lamp bulb may burn out during normal operation and cause glass dust or shards to be discharged outward from the rear exhaust vent. Do not inhale or do not touch glass dust or shards. Doing so could result in injury. vii