NEC NP610 NP310 : user's manual - Page 35
Projecting an Image (Basic Operation), (1) Turning on the Projector
![]() |
UPC - 805736031157
View all NEC NP610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. Turning on the Projector NOTE: • The projector has two power switches: a main power switch and a (POWER) button (POWER ON and OFF on the remote control). • When plugging in or unplugging the supplied power cable, make sure that the main power switch is pushed to the off () posi- tion. Failure to do so may cause damage to the projector. 1. Remove the lens cap • Do not remove the lens cap by pulling on the string. Doing so can cause mechanical damage to the part around the lens. FOCUS FOCUS 2. To turn on the main power to the projector, press the Main Power switch to the on position ( I ). The projector will go into standby mode. When in standby mode, the POWER indicator will light orange and the STATUS indicator will light green when [NORMAL] is selected for [STANDBY MODE]. See the Power Indicator section.(→ page 87) 26 SOURCE AUTO ADJ. LAMP STATUS
![](/manual_guide/products/nec-np310-np310-users-manual-8bf903c/35.png)