NEC PA271W-BK MultiSync PA231W-BK : user's manual - Page 10
Mount Flexible arm, Flexible Arm Installation, Remove Monitor Stand for Mounting, S.1
UPC - 805736034844
View all NEC PA271W-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. To prepare the monitor for alternate mounting purposes: NOTE: For PA301W, the monitor must be installed or moved by two or more people. • Follow the instructions provided by the manufacturer of the display mount. • To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the monitor. See pages 26-29 for details on each model. Remove the monitor stand before mounting. Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place hands on each side of the monitor and lift up to the highest position. 3. Place monitor face down on a non-abrasive surface (Figure S.1). 4. Place one hand around the base and one hand on the Quick Release Lever. Push and hold the Quick Release Lever in the direction indicated by the arrows (Figure S.1). 5. Lift up the stand to unhook it from the monitor (Figure S.1). The monitor can now be mounted using an alternate method. Reverse process to reattach stand. NOTE: Handle with care when removing monitor stand. Mount Flexible arm This LCD monitor is designed for use with a flexible arm. 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the 4 screws from the stand removal and attach the arm to the monitor (Figure F.1). Caution: Use ONLY the screws (4 pcs) that are included or the screws M4 size (Length: thickness of bracket and washer + 10-12 mm) when mounting to avoid damage to the monitor and stand. To fulfil the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of 200 mm*2 100 mm the monitor. The LCD monitor should only be used with an approved arm (e.g. GS mark). Figure S.1 Unit Mounting Bracket Washer 10-12 mm Screw Thickness of bracket and washer NOTE: Tighten all screws. (recommended Fasten Force: 98 - 137N•cm) *2 Only for PA271W/PA301W. 100 mm Weight of LCD assembly: 7.0 kg (PA231W) 7.4 kg (PA241W) 9.6 kg (PA271W) 12.5 kg (PA301W) Figure F.1 English-8